Fuootech Oil Filtration Group
Series ZYD-W Fully Enclosed Double-stage Vacuum Insulating Oil Treatment Plant
  • Series ZYD-W Fully Enclosed Double-stage Vacuum Insulating Oil Treatment Plant
  • Series ZYD-W Fully Enclosed Double-stage Vacuum Insulating Oil Treatment Plant
  • Series ZYD-W Fully Enclosed Double-stage Vacuum Insulating Oil Treatment Plant

Series ZYD-W Fully Enclosed Double-stage Vacuum Insulating Oil Treatment Plant

Series ZYD-W is for dealing with unqualified transformer 
oil, switch oil, mutual inductor oil at outdoors 
for weather proof, sand proof, wind proof, etc.

  • Share This Post:

     Series ZYD-W fully enclosed type insulating oil treatment plant is mainly used for dealing with unqualified transformer oil, switch oil, mutual inductor oil in various large power equipments which are above 110 kV at outdoors for weather proof, sand proof, wind proof, etc.

     

     Series ZYD-W is developed on the basis of Double-stage vacuum transformer oil filtration machine Series ZYD. It has the same function of quickly remove water, trace water, gas, particles as well as acetylene, hydrogen, methane and other harmful ingredients from oil effectively to improve oil’s dielectric strength, effectively making sure electrical equipment working safely and normally.

     

     Series ZYD-W can also be used as independent vacuum source with functions of vacuum drying, vacuum pumping and vacuum oiling like ZYD Series.

     

     All the components such as pumps, motors, filters, tanks, valves, pipelines, controls, etc… are totally enclosed and protected by steel frame cover and heavy duty doors enclosure and designed for lifting crane (equipped with lifting hooks). The equipment inside will be facilitated by a system of door locks installed at a perimeter of the enclosure.

     

     Oil Result after Filtration                                              

    Moisture (Water Content)

    ≤ 3 ~ 5 PPM

    Gas Content

    ≤0.01% (Vol)

    Impurities Degree (Filtration precision)

    ≤ 3 ~ 5 micron (no free carbon)

    Breakdown Voltage (Dielectric)

    ≥70 KV

    Flash Point

    ≥145

    Cleanliness

    ≤NAS 1638 Grade 6

     

      Fully enclosed by doors and cover, weather proof, sand proof, wind proof, very suitable to use at outside fields.
      Doors and cover can be made of different materials such as stainless steel, carbon steel and aluminum alloy, and also can be made in different styles such as push-pull type, and Air supported semi-auto type, etc.
      Duplex 3D stereo-evaporation, efficient oil film sprayer, eliminating the liquid water quickly, increasing separating size and separating time to ensure the dry-level and dielectric strength improving greatly.
      Multi-stage precision filtration system, high quality of stainless steel filters’ filtration combined with molecular adsorption technologies.

      Double-stage vacuum system, high vacuum pressure and high flow rate, strong power of vacuum evacuating

      Duplex 3D Stereo- evaporation technology combined with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil.
      Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.
      Double-infrared liquid level sensor, pressure protective system to ensure machine operation easy and safely.

      Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak.

      Specially applied to proceed vacuum oiling and drying (Hot Oil Circulation / on-site Drying) for electrical power equipments which are over 110KV.

      Low maintenance cost and time and Advanced dielectric Condenser devices.

     

     

    Parameters

    Model

    Unit

    ZYD-W-30

    ZYD-W -50

    ZYD-W -100

    ZYD-W -150

    ZYD-W -200

    ZYD-W -250

    ZYD-W -300

    Flow Rate

    L/H

    1800

    3000

    6000

    9000

    12000

    15000

    18000

    Working Vacuum Degree

    MPa

    -0.08 ~ -0.099

    Working

    Discharge Pressure

    MPa

    ≤ 0.3

    Temperature

    Control Range

    20 ~ 80

    Operation Temperature

    40 ~ 70 (65℃ is best)

    Power Supply


    380V, 50Hz, 3 phases (or as per your requirements)

    Working hours

    without Trouble

    Hour

    4000

    Continuous Working Hours

    Hour

    150

    Ambient Temperature


    -25 ~ 55℃

    Working Noise

    dB(A)

    65 ~ 90

    Heating Power

    (adjusted available)

    KW

    30

    36

    48

    60

    72

    80

    120

    Total Power

    KW

    35.5

    42

    52.5

    68

    82

    93

    135

    Inlet/Outlet

    mm

    φ25

    φ32

    φ42

    φ50

    φ50

    φ60

    φ60

    Gross Weight

    KGS

    600

    830

    1190

    1350

    1490

    1600

    1950

    Dimension

    L×W×H

    mm

    1450

    ×1050

    ×1860

    1710

    ×1350

    ×2150

    1900

    ×1420

    ×2190

    1940

    ×1480

    ×2220

    2120

    ×1500

    ×2240

    2150

    ×1700

    ×2350

    2300

    ×1850

    ×2460

     Note:     1. The dimension and weight will be changed with changing of technical specs.

                    2. All the specs can be customized according to client's requirements.

     

        For more info, pls don't hesitate to contact us.

Top
Series ZYD-W Fully Enclosed Double-stage Vacuum Insulating Oil Treatment Plant

Series ZYD-W Fully Enclosed Double-stage Vacuum Insulating Oil Treatment Plant

Series ZYD-W is for dealing with unqualified transformer 
oil, switch oil, mutual inductor oil at outdoors 
for weather proof, sand proof, wind proof, etc.

     Series ZYD-W fully enclosed type insulating oil treatment plant is mainly used for dealing with unqualified transformer oil, switch oil, mutual inductor oil in various large power equipments which are above 110 kV at outdoors for weather proof, sand proof, wind proof, etc.

     

     Series ZYD-W is developed on the basis of Double-stage vacuum transformer oil filtration machine Series ZYD. It has the same function of quickly remove water, trace water, gas, particles as well as acetylene, hydrogen, methane and other harmful ingredients from oil effectively to improve oil’s dielectric strength, effectively making sure electrical equipment working safely and normally.

     

     Series ZYD-W can also be used as independent vacuum source with functions of vacuum drying, vacuum pumping and vacuum oiling like ZYD Series.

     

     All the components such as pumps, motors, filters, tanks, valves, pipelines, controls, etc… are totally enclosed and protected by steel frame cover and heavy duty doors enclosure and designed for lifting crane (equipped with lifting hooks). The equipment inside will be facilitated by a system of door locks installed at a perimeter of the enclosure.

     

     Oil Result after Filtration                                              

    Moisture (Water Content)

    ≤ 3 ~ 5 PPM

    Gas Content

    ≤0.01% (Vol)

    Impurities Degree (Filtration precision)

    ≤ 3 ~ 5 micron (no free carbon)

    Breakdown Voltage (Dielectric)

    ≥70 KV

    Flash Point

    ≥145

    Cleanliness

    ≤NAS 1638 Grade 6

     

      Fully enclosed by doors and cover, weather proof, sand proof, wind proof, very suitable to use at outside fields.
      Doors and cover can be made of different materials such as stainless steel, carbon steel and aluminum alloy, and also can be made in different styles such as push-pull type, and Air supported semi-auto type, etc.
      Duplex 3D stereo-evaporation, efficient oil film sprayer, eliminating the liquid water quickly, increasing separating size and separating time to ensure the dry-level and dielectric strength improving greatly.
      Multi-stage precision filtration system, high quality of stainless steel filters’ filtration combined with molecular adsorption technologies.

      Double-stage vacuum system, high vacuum pressure and high flow rate, strong power of vacuum evacuating

      Duplex 3D Stereo- evaporation technology combined with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil.
      Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.
      Double-infrared liquid level sensor, pressure protective system to ensure machine operation easy and safely.

      Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak.

      Specially applied to proceed vacuum oiling and drying (Hot Oil Circulation / on-site Drying) for electrical power equipments which are over 110KV.

      Low maintenance cost and time and Advanced dielectric Condenser devices.

     

     

    Parameters

    Model

    Unit

    ZYD-W-30

    ZYD-W -50

    ZYD-W -100

    ZYD-W -150

    ZYD-W -200

    ZYD-W -250

    ZYD-W -300

    Flow Rate

    L/H

    1800

    3000

    6000

    9000

    12000

    15000

    18000

    Working Vacuum Degree

    MPa

    -0.08 ~ -0.099

    Working

    Discharge Pressure

    MPa

    ≤ 0.3

    Temperature

    Control Range

    20 ~ 80

    Operation Temperature

    40 ~ 70 (65℃ is best)

    Power Supply


    380V, 50Hz, 3 phases (or as per your requirements)

    Working hours

    without Trouble

    Hour

    4000

    Continuous Working Hours

    Hour

    150

    Ambient Temperature


    -25 ~ 55℃

    Working Noise

    dB(A)

    65 ~ 90

    Heating Power

    (adjusted available)

    KW

    30

    36

    48

    60

    72

    80

    120

    Total Power

    KW

    35.5

    42

    52.5

    68

    82

    93

    135

    Inlet/Outlet

    mm

    φ25

    φ32

    φ42

    φ50

    φ50

    φ60

    φ60

    Gross Weight

    KGS

    600

    830

    1190

    1350

    1490

    1600

    1950

    Dimension

    L×W×H

    mm

    1450

    ×1050

    ×1860

    1710

    ×1350

    ×2150

    1900

    ×1420

    ×2190

    1940

    ×1480

    ×2220

    2120

    ×1500

    ×2240

    2150

    ×1700

    ×2350

    2300

    ×1850

    ×2460

     Note:     1. The dimension and weight will be changed with changing of technical specs.

                    2. All the specs can be customized according to client's requirements.

     

        For more info, pls don't hesitate to contact us.

    CONTACT US
  • NO.5 Hongshi Street, Jiulongpo District, Chongqing, China
  • +86 135 2739 0908
  • +86 23 8823 9845
  • +86 23 8823 9845
  • Contact Us   Sitemap
  • Series ZYD-W Fully Enclosed Double-stage Vacuum Insulating Oil Treatment Plant

    Series ZYD-W Fully Enclosed Double-stage Vacuum Insulating Oil Treatment Plant

    Series ZYD-W is for dealing with unqualified transformer 
    oil, switch oil, mutual inductor oil at outdoors 
    for weather proof, sand proof, wind proof, etc.

    • Share This Post:

       Series ZYD-W fully enclosed type insulating oil treatment plant is mainly used for dealing with unqualified transformer oil, switch oil, mutual inductor oil in various large power equipments which are above 110 kV at outdoors for weather proof, sand proof, wind proof, etc.

       

       Series ZYD-W is developed on the basis of Double-stage vacuum transformer oil filtration machine Series ZYD. It has the same function of quickly remove water, trace water, gas, particles as well as acetylene, hydrogen, methane and other harmful ingredients from oil effectively to improve oil’s dielectric strength, effectively making sure electrical equipment working safely and normally.

       

       Series ZYD-W can also be used as independent vacuum source with functions of vacuum drying, vacuum pumping and vacuum oiling like ZYD Series.

       

       All the components such as pumps, motors, filters, tanks, valves, pipelines, controls, etc… are totally enclosed and protected by steel frame cover and heavy duty doors enclosure and designed for lifting crane (equipped with lifting hooks). The equipment inside will be facilitated by a system of door locks installed at a perimeter of the enclosure.

       

       Oil Result after Filtration                                              

      Moisture (Water Content)

      ≤ 3 ~ 5 PPM

      Gas Content

      ≤0.01% (Vol)

      Impurities Degree (Filtration precision)

      ≤ 3 ~ 5 micron (no free carbon)

      Breakdown Voltage (Dielectric)

      ≥70 KV

      Flash Point

      ≥145

      Cleanliness

      ≤NAS 1638 Grade 6

       

        Fully enclosed by doors and cover, weather proof, sand proof, wind proof, very suitable to use at outside fields.
        Doors and cover can be made of different materials such as stainless steel, carbon steel and aluminum alloy, and also can be made in different styles such as push-pull type, and Air supported semi-auto type, etc.
        Duplex 3D stereo-evaporation, efficient oil film sprayer, eliminating the liquid water quickly, increasing separating size and separating time to ensure the dry-level and dielectric strength improving greatly.
        Multi-stage precision filtration system, high quality of stainless steel filters’ filtration combined with molecular adsorption technologies.

        Double-stage vacuum system, high vacuum pressure and high flow rate, strong power of vacuum evacuating

        Duplex 3D Stereo- evaporation technology combined with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil.
        Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.
        Double-infrared liquid level sensor, pressure protective system to ensure machine operation easy and safely.

        Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak.

        Specially applied to proceed vacuum oiling and drying (Hot Oil Circulation / on-site Drying) for electrical power equipments which are over 110KV.

        Low maintenance cost and time and Advanced dielectric Condenser devices.

       

       

      Parameters

      Model

      Unit

      ZYD-W-30

      ZYD-W -50

      ZYD-W -100

      ZYD-W -150

      ZYD-W -200

      ZYD-W -250

      ZYD-W -300

      Flow Rate

      L/H

      1800

      3000

      6000

      9000

      12000

      15000

      18000

      Working Vacuum Degree

      MPa

      -0.08 ~ -0.099

      Working

      Discharge Pressure

      MPa

      ≤ 0.3

      Temperature

      Control Range

      20 ~ 80

      Operation Temperature

      40 ~ 70 (65℃ is best)

      Power Supply


      380V, 50Hz, 3 phases (or as per your requirements)

      Working hours

      without Trouble

      Hour

      4000

      Continuous Working Hours

      Hour

      150

      Ambient Temperature


      -25 ~ 55℃

      Working Noise

      dB(A)

      65 ~ 90

      Heating Power

      (adjusted available)

      KW

      30

      36

      48

      60

      72

      80

      120

      Total Power

      KW

      35.5

      42

      52.5

      68

      82

      93

      135

      Inlet/Outlet

      mm

      φ25

      φ32

      φ42

      φ50

      φ50

      φ60

      φ60

      Gross Weight

      KGS

      600

      830

      1190

      1350

      1490

      1600

      1950

      Dimension

      L×W×H

      mm

      1450

      ×1050

      ×1860

      1710

      ×1350

      ×2150

      1900

      ×1420

      ×2190

      1940

      ×1480

      ×2220

      2120

      ×1500

      ×2240

      2150

      ×1700

      ×2350

      2300

      ×1850

      ×2460

       Note:     1. The dimension and weight will be changed with changing of technical specs.

                      2. All the specs can be customized according to client's requirements.

       

          For more info, pls don't hesitate to contact us.

    CONTACT US