Fuootech Oil Filtration Group
Series PO-H Portable High Precision Oil Purifier (Equipped with heaters)
  • Series PO-H Portable High Precision Oil Purifier (Equipped with heaters)
  • Series PO-H Portable High Precision Oil Purifier (Equipped with heaters)
  • Series PO-H Portable High Precision Oil Purifier (Equipped with heaters)
  • Series PO-H Portable High Precision Oil Purifier (Equipped with heaters)

Series PO-H Portable High Precision Oil Purifier (Equipped with heaters)

It’s developed based on Series PO. As per some client’s 
requirements of heating the oil(especially high viscosity oils), 
we install the heaters for this machine to solve this mater.

  • Share This Post:

    Series PO-H Portable High Precision Oil Purifier (equipped with heaters) which mainly deal with unqualified insulating oil, turbine oil, lubricating oil etc., it consists with motor-driven special gear pump and multi-stage filters for filtering dirty oils by removing various sizes of particles & impurities. Small and flexible size, easy to operate and requires no filter paper and causes no contamination to the ground. It has a wider application than ordinary filter press and has a long lifetime, being a new substitute for frame filter press.

     

     It’s developed based on Series PO. As per some client’s requirements of heating the oil (especially high viscosity oils), we install the heaters for this machine to solve this mater. After heating, the oil can flow into the machine more quickly and smoothly.


    Oil suction point is equipped with a coarse filter to protect pump, and prolong the service life of main two filters. Filter precision can be adjusted and changed according to client's actual need.  This machine can do precision filtering, it usually equips three-stage filters, also can equip four or five stage filters as per user's requirements . Light weight, easy operation, it can be used as oiling machine for long distance and high-lift oiling works.

     

     Pressure Gauge monitors the working status of machine and pollution levels continuously.


     
    It is also used for oil transferring/ filling at working fields, suitable for field portable assignments and aerial work, while oil filling, filtration is also done at same time
    .

     

     High quality of Heater system installed, help heat the oils (especially high viscosity oils) and let the oil flow into machine more quickly and smoothly.

       Compact structure, small volume, light weight, easy to carry

       Internal use filter element to filter, repeated use, save cost, not contaminated sites
       Filtration precision, the product specifications can be free to choose according to need
       Can be made into explosion-proof type, used at dangerous working area.
       Use patented technology to produce. Such as high-effective separating separation tower, fuzzy control technology, dewatering and degassing very effectively.

        It can purify the losing-efficient insulation oil and make the oil reach the new oil standard without power cut, changing the oil or using filtering papers.

       Have the function of filling oil under vacuum condition.
       The purifier has large route, strong capability of holding dirt and can be used for a long time.
       The ultrasonic cleaning function can be selected.

       Stable and safe Operation with low noise. 
       
    Can effectively purify the tiny and fine mechanical impurity from oil, enabling it to be a prior choice of power industry, petroleum, chemical, metallurgy, mechanics and railway for oil filling, oil drawing and high precision impurity removal of mutual inductor, lathe, and oil breaker which do not use large quantity of oil.

       Fully enclosed type are available to produce.

     

    Item

    Unit

    PO-H-32

    PO-H-50

    PO-H-100

    PO-H-150

    PO-H-200

    PO-H-300

    PO-H-500

    PO-H-600

    Flow rate

    L/H

    1920

    3000

    6000

    9000

    12000

    18000

    30000

    36000

    Lift

    m

    5

    8

    8

    10

    15

    15

    18

    20

    Cleanness

    NAS

    7

    6

    6

    6

    6

    5

    5

    5

    Power supply

    380 VAC, 50 Hz, 3 Phase (or as per required)

    Working noise

    DB (A)

    ≤ 65 ~ 75

    Motor Power

    KW

    0.75

    1.1

    1.5

    2.5

    3

    6

    9

    13

    Heater Power

    KW

    18

    24

    30

    48

    60

    90

    120

    150

    Inlet (outlet)   caliber

    mm

    Ф25

    Ф25

    Ф25

    Ф32

    Ф42

    Ф50

    Ф50

    Ф60

    Weight

    Kg

    120

    130

    150

    160

    180

    200

    370

    480

    Note:     1. The dimension and weight will be changed with changing of technical specs.

                    2. All the specs can be customized according to client's requirements.

     

        For more info, pls don't hesitate to contact us.

     

Top
Series PO-H Portable High Precision Oil Purifier (Equipped with heaters)

Series PO-H Portable High Precision Oil Purifier (Equipped with heaters)

It’s developed based on Series PO. As per some client’s 
requirements of heating the oil(especially high viscosity oils), 
we install the heaters for this machine to solve this mater.

    Series PO-H Portable High Precision Oil Purifier (equipped with heaters) which mainly deal with unqualified insulating oil, turbine oil, lubricating oil etc., it consists with motor-driven special gear pump and multi-stage filters for filtering dirty oils by removing various sizes of particles & impurities. Small and flexible size, easy to operate and requires no filter paper and causes no contamination to the ground. It has a wider application than ordinary filter press and has a long lifetime, being a new substitute for frame filter press.

     

     It’s developed based on Series PO. As per some client’s requirements of heating the oil (especially high viscosity oils), we install the heaters for this machine to solve this mater. After heating, the oil can flow into the machine more quickly and smoothly.


    Oil suction point is equipped with a coarse filter to protect pump, and prolong the service life of main two filters. Filter precision can be adjusted and changed according to client's actual need.  This machine can do precision filtering, it usually equips three-stage filters, also can equip four or five stage filters as per user's requirements . Light weight, easy operation, it can be used as oiling machine for long distance and high-lift oiling works.

     

     Pressure Gauge monitors the working status of machine and pollution levels continuously.


     
    It is also used for oil transferring/ filling at working fields, suitable for field portable assignments and aerial work, while oil filling, filtration is also done at same time
    .

     

     High quality of Heater system installed, help heat the oils (especially high viscosity oils) and let the oil flow into machine more quickly and smoothly.

       Compact structure, small volume, light weight, easy to carry

       Internal use filter element to filter, repeated use, save cost, not contaminated sites
       Filtration precision, the product specifications can be free to choose according to need
       Can be made into explosion-proof type, used at dangerous working area.
       Use patented technology to produce. Such as high-effective separating separation tower, fuzzy control technology, dewatering and degassing very effectively.

        It can purify the losing-efficient insulation oil and make the oil reach the new oil standard without power cut, changing the oil or using filtering papers.

       Have the function of filling oil under vacuum condition.
       The purifier has large route, strong capability of holding dirt and can be used for a long time.
       The ultrasonic cleaning function can be selected.

       Stable and safe Operation with low noise. 
       
    Can effectively purify the tiny and fine mechanical impurity from oil, enabling it to be a prior choice of power industry, petroleum, chemical, metallurgy, mechanics and railway for oil filling, oil drawing and high precision impurity removal of mutual inductor, lathe, and oil breaker which do not use large quantity of oil.

       Fully enclosed type are available to produce.

     

    Item

    Unit

    PO-H-32

    PO-H-50

    PO-H-100

    PO-H-150

    PO-H-200

    PO-H-300

    PO-H-500

    PO-H-600

    Flow rate

    L/H

    1920

    3000

    6000

    9000

    12000

    18000

    30000

    36000

    Lift

    m

    5

    8

    8

    10

    15

    15

    18

    20

    Cleanness

    NAS

    7

    6

    6

    6

    6

    5

    5

    5

    Power supply

    380 VAC, 50 Hz, 3 Phase (or as per required)

    Working noise

    DB (A)

    ≤ 65 ~ 75

    Motor Power

    KW

    0.75

    1.1

    1.5

    2.5

    3

    6

    9

    13

    Heater Power

    KW

    18

    24

    30

    48

    60

    90

    120

    150

    Inlet (outlet)   caliber

    mm

    Ф25

    Ф25

    Ф25

    Ф32

    Ф42

    Ф50

    Ф50

    Ф60

    Weight

    Kg

    120

    130

    150

    160

    180

    200

    370

    480

    Note:     1. The dimension and weight will be changed with changing of technical specs.

                    2. All the specs can be customized according to client's requirements.

     

        For more info, pls don't hesitate to contact us.

     

    CONTACT US
  • NO.5 Hongshi Street, Jiulongpo District, Chongqing, China
  • +86 135 2739 0908
  • +86 23 8823 9845
  • +86 23 8823 9845
  • Contact Us   Sitemap
  • Series PO-H Portable High Precision Oil Purifier (Equipped with heaters)

    Series PO-H Portable High Precision Oil Purifier (Equipped with heaters)

    It’s developed based on Series PO. As per some client’s 
    requirements of heating the oil(especially high viscosity oils), 
    we install the heaters for this machine to solve this mater.

    • Share This Post:

      Series PO-H Portable High Precision Oil Purifier (equipped with heaters) which mainly deal with unqualified insulating oil, turbine oil, lubricating oil etc., it consists with motor-driven special gear pump and multi-stage filters for filtering dirty oils by removing various sizes of particles & impurities. Small and flexible size, easy to operate and requires no filter paper and causes no contamination to the ground. It has a wider application than ordinary filter press and has a long lifetime, being a new substitute for frame filter press.

       

       It’s developed based on Series PO. As per some client’s requirements of heating the oil (especially high viscosity oils), we install the heaters for this machine to solve this mater. After heating, the oil can flow into the machine more quickly and smoothly.


      Oil suction point is equipped with a coarse filter to protect pump, and prolong the service life of main two filters. Filter precision can be adjusted and changed according to client's actual need.  This machine can do precision filtering, it usually equips three-stage filters, also can equip four or five stage filters as per user's requirements . Light weight, easy operation, it can be used as oiling machine for long distance and high-lift oiling works.

       

       Pressure Gauge monitors the working status of machine and pollution levels continuously.


       
      It is also used for oil transferring/ filling at working fields, suitable for field portable assignments and aerial work, while oil filling, filtration is also done at same time
      .

       

       High quality of Heater system installed, help heat the oils (especially high viscosity oils) and let the oil flow into machine more quickly and smoothly.

         Compact structure, small volume, light weight, easy to carry

         Internal use filter element to filter, repeated use, save cost, not contaminated sites
         Filtration precision, the product specifications can be free to choose according to need
         Can be made into explosion-proof type, used at dangerous working area.
         Use patented technology to produce. Such as high-effective separating separation tower, fuzzy control technology, dewatering and degassing very effectively.

          It can purify the losing-efficient insulation oil and make the oil reach the new oil standard without power cut, changing the oil or using filtering papers.

         Have the function of filling oil under vacuum condition.
         The purifier has large route, strong capability of holding dirt and can be used for a long time.
         The ultrasonic cleaning function can be selected.

         Stable and safe Operation with low noise. 
         
      Can effectively purify the tiny and fine mechanical impurity from oil, enabling it to be a prior choice of power industry, petroleum, chemical, metallurgy, mechanics and railway for oil filling, oil drawing and high precision impurity removal of mutual inductor, lathe, and oil breaker which do not use large quantity of oil.

         Fully enclosed type are available to produce.

       

      Item

      Unit

      PO-H-32

      PO-H-50

      PO-H-100

      PO-H-150

      PO-H-200

      PO-H-300

      PO-H-500

      PO-H-600

      Flow rate

      L/H

      1920

      3000

      6000

      9000

      12000

      18000

      30000

      36000

      Lift

      m

      5

      8

      8

      10

      15

      15

      18

      20

      Cleanness

      NAS

      7

      6

      6

      6

      6

      5

      5

      5

      Power supply

      380 VAC, 50 Hz, 3 Phase (or as per required)

      Working noise

      DB (A)

      ≤ 65 ~ 75

      Motor Power

      KW

      0.75

      1.1

      1.5

      2.5

      3

      6

      9

      13

      Heater Power

      KW

      18

      24

      30

      48

      60

      90

      120

      150

      Inlet (outlet)   caliber

      mm

      Ф25

      Ф25

      Ф25

      Ф32

      Ф42

      Ф50

      Ф50

      Ф60

      Weight

      Kg

      120

      130

      150

      160

      180

      200

      370

      480

      Note:     1. The dimension and weight will be changed with changing of technical specs.

                      2. All the specs can be customized according to client's requirements.

       

          For more info, pls don't hesitate to contact us.

       

    CONTACT US