Fuootech Oil Filtration Group
Oil Filters for Oil Purifiers
  • Oil Filters for Oil Purifiers
  • Oil Filters for Oil Purifiers
  • Oil Filters for Oil Purifiers

Oil Filters for Oil Purifiers

We suggest customer buying one more set of 
oil filters together with the oil filtration machines 
for 2 years operation as spare.

  • Share This Post:

     In the respect of removing the impurity, some factories adopt the only network mesh filtering, which filtering by the filtering strainer, filtering fabric or filter made of filtering paper. These filters remove the impurity by the aperture size of the strainer, in this way, it can remove the impurity which is bigger than the aperture size, but remains the ones which smaller than aperture size.

     

     If filter’s aperture size is too small (i.e. less than 5 micron), the oil cannot pass through, meanwhile the high pressure from this blockage will stop the machine working.  At present, the best filter of china can only control β value ≥200. But the tiny impurities are also very dangerious and contaminative to the oil’s quality.

     

       In order to solve this problem, we adopt double FH trapezoidal network method instead of traditional simple network filtering method to enlarge the filter’s β value upto / more than 300.  And we bring in the GermanyH.P.M high molecule polymer material made up of high molecule polymer materials with free body molecule, which adopt use of non-mechanical force (Coulomb force) means for absorbing all the tiny impurities.

     

     This method is to absorb the impurity on the filter wall according to the differences of dielectric constant ε among oil, water, colloid, acid, mechanical impurities, and so on. The Coulomb force is achieved through high-speed operation of inter-molecular.

     

       This high molecule filter must be satisfied with two requirements: firstly, the flow rate cannot be less than 10L/min; secondly, oil temperature cannot be lower than 45. Then It can produce the Coulomb force. We adopt two sets of double FH trapezoidal network filters and one Germany H.P.M high molecule polymer material filter as a combined filtering system to remove all kinds of particles & impurities, it can not only ensure that particle size is removed down to 5 micron, but also ensures the oil cleanliness ≤ Grade 6 (NAS 1638).  And the filter vessels are leak proof and suitable for high vacuum and pressure application.

     

       Filters are distributed as below:

     

     1:  First-stage Filter 

    Made of Stainless steel material, Double FH trapezoidal network filtering technology, it removes particles and impurities down to 80 microns.

     

    2:  Second-stage Filter

    Made of Stainless steel material, Double FH trapezoidal network filtering technology, it removes particles and impurities down to 20 microns.

     

    3:  Fine Filter:

    Made by Germany H.P.M High Polymer Materials, it removes particles and impurities down to 1~ 5 microns, making oil clean finally.

     

      We suggest customer buying one more set of oil filters together with the oil filtration machines for 2 years operation as spare.

     

      If there is any question or purchase plan on oil filters for your oil filtration machine, welcome to contact us.

     

    In the respect of removing the impurity, some factories adopt the only network mesh filtering, which filtering by the filtering strainer, filtering fabric or filter made of filtering paper. These filters remove the impurity by the aperture size of the strainer, in this way, it can remove the impurity which is bigger than the aperture size, but remains the ones which smaller than aperture size.

    If filter’s aperture size is too small (i.e. less than 5 micron), the oil cannot pass through, meanwhile the high pressure from this blockage will stop the machine working.  At present, the best filter of china can only control β value ≥200. But the tiny impurities are also very dangerious and contaminative to the oil’s quality.

      In order to solve this problem, we adopt double FH trapezoidal network method instead of traditional simple network filtering method to enlarge the filter’s β value upto / more than 300.  And we bring in the GermanyH.P.M high molecule polymer material made up of high molecule polymer materials with free body molecule, which adopt use of non-mechanical force (Coulomb force) means for absorbing all the tiny impurities.

    This method is to absorb the impurity on the filter wall according to the differences of dielectric constant ε among oil, water, colloid, acid, mechanical impurities, and so on. The Coulomb force is achieved through high-speed operation of inter-molecular.

      This high molecule filter must be satisfied with two requirements: firstly, the flow rate cannot be less than 10L/min; secondly, oil temperature cannot be lower than 45. Then It can produce the Coulomb force. We adopt two sets of double FH trapezoidal network filters and one Germany H.P.M high molecule polymer material filter as a combined filtering system to remove all kinds of particles & impurities, it can not only ensure that particle size is removed down to 5 micron, but also ensures the oil cleanliness ≤ Grade 6 (NAS 1638).  And the filter vessels are leak proof and suitable for high vacuum and pressure application.

      Filters are distributed as below:

    1:  First-stage Filter  

    Made of Stainless steel material, Double FH trapezoidal network filtering technology, it removes particles and impurities down to 80 microns.

    2:  Second-stage Filter

    Made of Stainless steel material, Double FH trapezoidal network filtering technology, it removes particles and impurities down to 20 microns.

    3:  Fine Filter:

    Made by Germany H.P.M High Polymer Materials, it removes particles and impurities down to 1~ 5 microns, making oil clean finally.

    We suggest customer buying one more set of oil filters together with the oil filtration machines for 2 years operation as spare.

    If there is any question or purchase plan on oil filters for your oil filtration machine, welcome to contact us.

     

     

    In the respect of removing the impurity, some factories adopt the only network mesh filtering, which filtering by the filtering strainer, filtering fabric or filter made of filtering paper. These filters remove the impurity by the aperture size of the strainer, in this way, it can remove the impurity which is bigger than the aperture size, but remains the ones which smaller than aperture size.

    If filter’s aperture size is too small (i.e. less than 5 micron), the oil cannot pass through, meanwhile the high pressure from this blockage will stop the machine working.  At present, the best filter of china can only control β value ≥200. But the tiny impurities are also very dangerious and contaminative to the oil’s quality.

      In order to solve this problem, we adopt double FH trapezoidal network method instead of traditional simple network filtering method to enlarge the filter’s β value upto / more than 300.  And we bring in the GermanyH.P.M high molecule polymer material made up of high molecule polymer materials with free body molecule, which adopt use of non-mechanical force (Coulomb force) means for absorbing all the tiny impurities.

    This method is to absorb the impurity on the filter wall according to the differences of dielectric constant ε among oil, water, colloid, acid, mechanical impurities, and so on. The Coulomb force is achieved through high-speed operation of inter-molecular.

      This high molecule filter must be satisfied with two requirements: firstly, the flow rate cannot be less than 10L/min; secondly, oil temperature cannot be lower than 45. Then It can produce the Coulomb force. We adopt two sets of double FH trapezoidal network filters and one Germany H.P.M high molecule polymer material filter as a combined filtering system to remove all kinds of particles & impurities, it can not only ensure that particle size is removed down to 5 micron, but also ensures the oil cleanliness ≤ Grade 6 (NAS 1638).  And the filter vessels are leak proof and suitable for high vacuum and pressure application.

      Filters are distributed as below:

    1:  First-stage Filter  

    Made of Stainless steel material, Double FH trapezoidal network filtering technology, it removes particles and impurities down to 80 microns.

    2:  Second-stage Filter

    Made of Stainless steel material, Double FH trapezoidal network filtering technology, it removes particles and impurities down to 20 microns.

    3:  Fine Filter:

    Made by Germany H.P.M High Polymer Materials, it removes particles and impurities down to 1~ 5 microns, making oil clean finally.

    We suggest customer buying one more set of oil filters together with the oil filtration machines for 2 years operation as spare.

    If there is any question or purchase plan on oil filters for your oil filtration machine, welcome to contact us.

     

     

Top
Oil Filters for Oil Purifiers

Oil Filters for Oil Purifiers

We suggest customer buying one more set of 
oil filters together with the oil filtration machines 
for 2 years operation as spare.

     In the respect of removing the impurity, some factories adopt the only network mesh filtering, which filtering by the filtering strainer, filtering fabric or filter made of filtering paper. These filters remove the impurity by the aperture size of the strainer, in this way, it can remove the impurity which is bigger than the aperture size, but remains the ones which smaller than aperture size.

     

     If filter’s aperture size is too small (i.e. less than 5 micron), the oil cannot pass through, meanwhile the high pressure from this blockage will stop the machine working.  At present, the best filter of china can only control β value ≥200. But the tiny impurities are also very dangerious and contaminative to the oil’s quality.

     

       In order to solve this problem, we adopt double FH trapezoidal network method instead of traditional simple network filtering method to enlarge the filter’s β value upto / more than 300.  And we bring in the GermanyH.P.M high molecule polymer material made up of high molecule polymer materials with free body molecule, which adopt use of non-mechanical force (Coulomb force) means for absorbing all the tiny impurities.

     

     This method is to absorb the impurity on the filter wall according to the differences of dielectric constant ε among oil, water, colloid, acid, mechanical impurities, and so on. The Coulomb force is achieved through high-speed operation of inter-molecular.

     

       This high molecule filter must be satisfied with two requirements: firstly, the flow rate cannot be less than 10L/min; secondly, oil temperature cannot be lower than 45. Then It can produce the Coulomb force. We adopt two sets of double FH trapezoidal network filters and one Germany H.P.M high molecule polymer material filter as a combined filtering system to remove all kinds of particles & impurities, it can not only ensure that particle size is removed down to 5 micron, but also ensures the oil cleanliness ≤ Grade 6 (NAS 1638).  And the filter vessels are leak proof and suitable for high vacuum and pressure application.

     

       Filters are distributed as below:

     

     1:  First-stage Filter 

    Made of Stainless steel material, Double FH trapezoidal network filtering technology, it removes particles and impurities down to 80 microns.

     

    2:  Second-stage Filter

    Made of Stainless steel material, Double FH trapezoidal network filtering technology, it removes particles and impurities down to 20 microns.

     

    3:  Fine Filter:

    Made by Germany H.P.M High Polymer Materials, it removes particles and impurities down to 1~ 5 microns, making oil clean finally.

     

      We suggest customer buying one more set of oil filters together with the oil filtration machines for 2 years operation as spare.

     

      If there is any question or purchase plan on oil filters for your oil filtration machine, welcome to contact us.

     

    In the respect of removing the impurity, some factories adopt the only network mesh filtering, which filtering by the filtering strainer, filtering fabric or filter made of filtering paper. These filters remove the impurity by the aperture size of the strainer, in this way, it can remove the impurity which is bigger than the aperture size, but remains the ones which smaller than aperture size.

    If filter’s aperture size is too small (i.e. less than 5 micron), the oil cannot pass through, meanwhile the high pressure from this blockage will stop the machine working.  At present, the best filter of china can only control β value ≥200. But the tiny impurities are also very dangerious and contaminative to the oil’s quality.

      In order to solve this problem, we adopt double FH trapezoidal network method instead of traditional simple network filtering method to enlarge the filter’s β value upto / more than 300.  And we bring in the GermanyH.P.M high molecule polymer material made up of high molecule polymer materials with free body molecule, which adopt use of non-mechanical force (Coulomb force) means for absorbing all the tiny impurities.

    This method is to absorb the impurity on the filter wall according to the differences of dielectric constant ε among oil, water, colloid, acid, mechanical impurities, and so on. The Coulomb force is achieved through high-speed operation of inter-molecular.

      This high molecule filter must be satisfied with two requirements: firstly, the flow rate cannot be less than 10L/min; secondly, oil temperature cannot be lower than 45. Then It can produce the Coulomb force. We adopt two sets of double FH trapezoidal network filters and one Germany H.P.M high molecule polymer material filter as a combined filtering system to remove all kinds of particles & impurities, it can not only ensure that particle size is removed down to 5 micron, but also ensures the oil cleanliness ≤ Grade 6 (NAS 1638).  And the filter vessels are leak proof and suitable for high vacuum and pressure application.

      Filters are distributed as below:

    1:  First-stage Filter  

    Made of Stainless steel material, Double FH trapezoidal network filtering technology, it removes particles and impurities down to 80 microns.

    2:  Second-stage Filter

    Made of Stainless steel material, Double FH trapezoidal network filtering technology, it removes particles and impurities down to 20 microns.

    3:  Fine Filter:

    Made by Germany H.P.M High Polymer Materials, it removes particles and impurities down to 1~ 5 microns, making oil clean finally.

    We suggest customer buying one more set of oil filters together with the oil filtration machines for 2 years operation as spare.

    If there is any question or purchase plan on oil filters for your oil filtration machine, welcome to contact us.

     

     

    In the respect of removing the impurity, some factories adopt the only network mesh filtering, which filtering by the filtering strainer, filtering fabric or filter made of filtering paper. These filters remove the impurity by the aperture size of the strainer, in this way, it can remove the impurity which is bigger than the aperture size, but remains the ones which smaller than aperture size.

    If filter’s aperture size is too small (i.e. less than 5 micron), the oil cannot pass through, meanwhile the high pressure from this blockage will stop the machine working.  At present, the best filter of china can only control β value ≥200. But the tiny impurities are also very dangerious and contaminative to the oil’s quality.

      In order to solve this problem, we adopt double FH trapezoidal network method instead of traditional simple network filtering method to enlarge the filter’s β value upto / more than 300.  And we bring in the GermanyH.P.M high molecule polymer material made up of high molecule polymer materials with free body molecule, which adopt use of non-mechanical force (Coulomb force) means for absorbing all the tiny impurities.

    This method is to absorb the impurity on the filter wall according to the differences of dielectric constant ε among oil, water, colloid, acid, mechanical impurities, and so on. The Coulomb force is achieved through high-speed operation of inter-molecular.

      This high molecule filter must be satisfied with two requirements: firstly, the flow rate cannot be less than 10L/min; secondly, oil temperature cannot be lower than 45. Then It can produce the Coulomb force. We adopt two sets of double FH trapezoidal network filters and one Germany H.P.M high molecule polymer material filter as a combined filtering system to remove all kinds of particles & impurities, it can not only ensure that particle size is removed down to 5 micron, but also ensures the oil cleanliness ≤ Grade 6 (NAS 1638).  And the filter vessels are leak proof and suitable for high vacuum and pressure application.

      Filters are distributed as below:

    1:  First-stage Filter  

    Made of Stainless steel material, Double FH trapezoidal network filtering technology, it removes particles and impurities down to 80 microns.

    2:  Second-stage Filter

    Made of Stainless steel material, Double FH trapezoidal network filtering technology, it removes particles and impurities down to 20 microns.

    3:  Fine Filter:

    Made by Germany H.P.M High Polymer Materials, it removes particles and impurities down to 1~ 5 microns, making oil clean finally.

    We suggest customer buying one more set of oil filters together with the oil filtration machines for 2 years operation as spare.

    If there is any question or purchase plan on oil filters for your oil filtration machine, welcome to contact us.

     

     

    CONTACT US
  • NO.5 Hongshi Street, Jiulongpo District, Chongqing, China
  • +86 135 2739 0908
  • +86 23 8823 9845
  • +86 23 8823 9845
  • Contact Us   Sitemap
  • Oil Filters for Oil Purifiers

    Oil Filters for Oil Purifiers

    We suggest customer buying one more set of 
    oil filters together with the oil filtration machines 
    for 2 years operation as spare.

    • Share This Post:

       In the respect of removing the impurity, some factories adopt the only network mesh filtering, which filtering by the filtering strainer, filtering fabric or filter made of filtering paper. These filters remove the impurity by the aperture size of the strainer, in this way, it can remove the impurity which is bigger than the aperture size, but remains the ones which smaller than aperture size.

       

       If filter’s aperture size is too small (i.e. less than 5 micron), the oil cannot pass through, meanwhile the high pressure from this blockage will stop the machine working.  At present, the best filter of china can only control β value ≥200. But the tiny impurities are also very dangerious and contaminative to the oil’s quality.

       

         In order to solve this problem, we adopt double FH trapezoidal network method instead of traditional simple network filtering method to enlarge the filter’s β value upto / more than 300.  And we bring in the GermanyH.P.M high molecule polymer material made up of high molecule polymer materials with free body molecule, which adopt use of non-mechanical force (Coulomb force) means for absorbing all the tiny impurities.

       

       This method is to absorb the impurity on the filter wall according to the differences of dielectric constant ε among oil, water, colloid, acid, mechanical impurities, and so on. The Coulomb force is achieved through high-speed operation of inter-molecular.

       

         This high molecule filter must be satisfied with two requirements: firstly, the flow rate cannot be less than 10L/min; secondly, oil temperature cannot be lower than 45. Then It can produce the Coulomb force. We adopt two sets of double FH trapezoidal network filters and one Germany H.P.M high molecule polymer material filter as a combined filtering system to remove all kinds of particles & impurities, it can not only ensure that particle size is removed down to 5 micron, but also ensures the oil cleanliness ≤ Grade 6 (NAS 1638).  And the filter vessels are leak proof and suitable for high vacuum and pressure application.

       

         Filters are distributed as below:

       

       1:  First-stage Filter 

      Made of Stainless steel material, Double FH trapezoidal network filtering technology, it removes particles and impurities down to 80 microns.

       

      2:  Second-stage Filter

      Made of Stainless steel material, Double FH trapezoidal network filtering technology, it removes particles and impurities down to 20 microns.

       

      3:  Fine Filter:

      Made by Germany H.P.M High Polymer Materials, it removes particles and impurities down to 1~ 5 microns, making oil clean finally.

       

        We suggest customer buying one more set of oil filters together with the oil filtration machines for 2 years operation as spare.

       

        If there is any question or purchase plan on oil filters for your oil filtration machine, welcome to contact us.

       

      In the respect of removing the impurity, some factories adopt the only network mesh filtering, which filtering by the filtering strainer, filtering fabric or filter made of filtering paper. These filters remove the impurity by the aperture size of the strainer, in this way, it can remove the impurity which is bigger than the aperture size, but remains the ones which smaller than aperture size.

      If filter’s aperture size is too small (i.e. less than 5 micron), the oil cannot pass through, meanwhile the high pressure from this blockage will stop the machine working.  At present, the best filter of china can only control β value ≥200. But the tiny impurities are also very dangerious and contaminative to the oil’s quality.

        In order to solve this problem, we adopt double FH trapezoidal network method instead of traditional simple network filtering method to enlarge the filter’s β value upto / more than 300.  And we bring in the GermanyH.P.M high molecule polymer material made up of high molecule polymer materials with free body molecule, which adopt use of non-mechanical force (Coulomb force) means for absorbing all the tiny impurities.

      This method is to absorb the impurity on the filter wall according to the differences of dielectric constant ε among oil, water, colloid, acid, mechanical impurities, and so on. The Coulomb force is achieved through high-speed operation of inter-molecular.

        This high molecule filter must be satisfied with two requirements: firstly, the flow rate cannot be less than 10L/min; secondly, oil temperature cannot be lower than 45. Then It can produce the Coulomb force. We adopt two sets of double FH trapezoidal network filters and one Germany H.P.M high molecule polymer material filter as a combined filtering system to remove all kinds of particles & impurities, it can not only ensure that particle size is removed down to 5 micron, but also ensures the oil cleanliness ≤ Grade 6 (NAS 1638).  And the filter vessels are leak proof and suitable for high vacuum and pressure application.

        Filters are distributed as below:

      1:  First-stage Filter  

      Made of Stainless steel material, Double FH trapezoidal network filtering technology, it removes particles and impurities down to 80 microns.

      2:  Second-stage Filter

      Made of Stainless steel material, Double FH trapezoidal network filtering technology, it removes particles and impurities down to 20 microns.

      3:  Fine Filter:

      Made by Germany H.P.M High Polymer Materials, it removes particles and impurities down to 1~ 5 microns, making oil clean finally.

      We suggest customer buying one more set of oil filters together with the oil filtration machines for 2 years operation as spare.

      If there is any question or purchase plan on oil filters for your oil filtration machine, welcome to contact us.

       

       

      In the respect of removing the impurity, some factories adopt the only network mesh filtering, which filtering by the filtering strainer, filtering fabric or filter made of filtering paper. These filters remove the impurity by the aperture size of the strainer, in this way, it can remove the impurity which is bigger than the aperture size, but remains the ones which smaller than aperture size.

      If filter’s aperture size is too small (i.e. less than 5 micron), the oil cannot pass through, meanwhile the high pressure from this blockage will stop the machine working.  At present, the best filter of china can only control β value ≥200. But the tiny impurities are also very dangerious and contaminative to the oil’s quality.

        In order to solve this problem, we adopt double FH trapezoidal network method instead of traditional simple network filtering method to enlarge the filter’s β value upto / more than 300.  And we bring in the GermanyH.P.M high molecule polymer material made up of high molecule polymer materials with free body molecule, which adopt use of non-mechanical force (Coulomb force) means for absorbing all the tiny impurities.

      This method is to absorb the impurity on the filter wall according to the differences of dielectric constant ε among oil, water, colloid, acid, mechanical impurities, and so on. The Coulomb force is achieved through high-speed operation of inter-molecular.

        This high molecule filter must be satisfied with two requirements: firstly, the flow rate cannot be less than 10L/min; secondly, oil temperature cannot be lower than 45. Then It can produce the Coulomb force. We adopt two sets of double FH trapezoidal network filters and one Germany H.P.M high molecule polymer material filter as a combined filtering system to remove all kinds of particles & impurities, it can not only ensure that particle size is removed down to 5 micron, but also ensures the oil cleanliness ≤ Grade 6 (NAS 1638).  And the filter vessels are leak proof and suitable for high vacuum and pressure application.

        Filters are distributed as below:

      1:  First-stage Filter  

      Made of Stainless steel material, Double FH trapezoidal network filtering technology, it removes particles and impurities down to 80 microns.

      2:  Second-stage Filter

      Made of Stainless steel material, Double FH trapezoidal network filtering technology, it removes particles and impurities down to 20 microns.

      3:  Fine Filter:

      Made by Germany H.P.M High Polymer Materials, it removes particles and impurities down to 1~ 5 microns, making oil clean finally.

      We suggest customer buying one more set of oil filters together with the oil filtration machines for 2 years operation as spare.

      If there is any question or purchase plan on oil filters for your oil filtration machine, welcome to contact us.

       

       

    CONTACT US