Fuootech Oil Filtration Group
Series ZYD-P Fully-automatic Transformer Oil Filtration Machine(with PLC system)
  • Series ZYD-P Fully-automatic Transformer Oil Filtration Machine(with PLC system)
  • Series ZYD-P Fully-automatic Transformer Oil Filtration Machine(with PLC system)
  • Series ZYD-P Fully-automatic Transformer Oil Filtration Machine(with PLC system)
  • Series ZYD-P Fully-automatic Transformer Oil Filtration Machine(with PLC system)
  • Series ZYD-P Fully-automatic Transformer Oil Filtration Machine(with PLC system)

Series ZYD-P Fully-automatic Transformer Oil Filtration Machine(with PLC system)

Fully Automatic type Double-stage Vacuum Transformer Oil Filtration Machine 
(Series ZYD-P) has been specially designed for on/off site 
use to completely purify insulating oils in energized or de-energized transformers

  • Share This Post:

     The FUOOTECH Fully Automatic type Double-stage Vacuum Transformer Oil Filtration Machine (Series ZYD-P) has been specially designed for on/off site use to completely purify insulating oils in energized or de-energized transformers even when transformer power both below and above 100kva, 110KV and altitude over 500 meters, as well as purify mutual inductor oil, switch oil and so on.  Also it can fill the insulating oil into the transformers on-line and dry the transformer.

     The ZYD-P oil filtration machine not only provides regular oil filtration works such as degassing, dehydration and particles removal, but also can remove acidity, sludge, carbon deposits, sulfur, and other soluble oil decay products, increase the oil’s dielectric strength value (BDV value) so as to improve the physical & chemical properties comparable to new transformer oil.

     The whole operation is fully automatically controlled by PLC System equipped with famous brand touch screen, all procedure are proceed by touch screen, easy and simple.

     

     Oil Result after Filtration                                            

    Moisture (Water Content)

    ≤ 5 PPM

    Gas Content

    ≤0.01% (Vol)

    Impurities Degree (Filtration precision)

    ≤ 5 micron (no free carbon)

    Breakdown Voltage (Dielectric)

    ≥70 KV

    Flash Point

    ≥145

    Cleanliness

    ≤NAS 1638 Grade 6


     High vacuum separating chambers, efficient oil film sprayer, increasing separating size and separating time to ensure the dry-level and dielectric strength improving greatly.

     Double-stage vacuum system, high vacuum pressure and high flow rate, strong power of vacuum evacuating

     Multi-stage precision filtration system, stainless steel material filters’ filtration combined with molecular adsorption technologies

     Duplex-Stereo film evaporation technology, combined with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil.

     UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effectively

     Besides the common vacuum oil purifier's function of dewatering, degassing and eliminating particles, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index like anti-oxides, acid-alkali water-solubility.

     Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.

     Double-infrared liquid level sensor and pressure protective system ensure machine operation easily and safely.

     Advanced dielectric Condenser devices and flow meter measuring the flow rate.

     Especially applied to vacuum oiling and drying (Hot Oil Circulation / on-site Drying) for power transmission equipments which are over 110KV

     Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.

     Low maintenance cost and time.

     

     

    Parameters

    Model

    Unit

    ZYD-P-30

    ZYD-P-50

    ZYD-P-100

    ZYD-P-150

    ZYD-P-200

    ZYD-P-250

    ZYD-P-300

    Flow Rate

    L/H

    1800

    3000

    6000

    9000

    12000

    15000

    18000

    Working Vacuum Degree

    MPa

    -0.08 ~ -0.099

    Working

    Discharge Pressure

    MPa

    ≤ 0.3

    Temperature

    Control Range

    20 ~ 80

    Operation Temperature

    40 ~ 70 (65℃ is best)

    Power Supply


    380V, 50Hz, 3 phases (or as per your requirements)

    Working hours

    without Trouble

    Hour

    4000

    Continuous Working Hours

    Hour

    150

    Ambient Temperature


    -25 ~ 55℃

    Working Noise

    dB(A)

    65 ~ 90

    Heating Power

    (adjusted available)

    KW

    30

    36

    48

    60

    72

    80

    120

    Total Power

    KW

    35.5

    42

    52.5

    68

    82

    93

    135

    Inlet/Outlet

    mm

    φ25

    φ32

    φ42

    φ50

    φ50

    φ60

    φ60

    Weight

    KGS

    600

    700

    1050

    1150

    1450

    1600

    1950

    Dimension

    Length

    mm

    1380

    1610

    1750

    1850

    1950

    2050

    2200

    Width

    mm

    1020

    1250

    1350

    1400

    1500

    1600

    1750

    Height

    mm

    1760

    1950

    2150

    2200

    2300

    2400

    2550

      Note:     1. The dimension and weight will be changed with changing of technical specs.

                    2. All the specs can be customized according to client's requirements.

     

        For more info, pls don't hesitate to contact us.

Top
Series ZYD-P Fully-automatic Transformer Oil Filtration Machine(with PLC system)

Series ZYD-P Fully-automatic Transformer Oil Filtration Machine(with PLC system)

Fully Automatic type Double-stage Vacuum Transformer Oil Filtration Machine 
(Series ZYD-P) has been specially designed for on/off site 
use to completely purify insulating oils in energized or de-energized transformers

     The FUOOTECH Fully Automatic type Double-stage Vacuum Transformer Oil Filtration Machine (Series ZYD-P) has been specially designed for on/off site use to completely purify insulating oils in energized or de-energized transformers even when transformer power both below and above 100kva, 110KV and altitude over 500 meters, as well as purify mutual inductor oil, switch oil and so on.  Also it can fill the insulating oil into the transformers on-line and dry the transformer.

     The ZYD-P oil filtration machine not only provides regular oil filtration works such as degassing, dehydration and particles removal, but also can remove acidity, sludge, carbon deposits, sulfur, and other soluble oil decay products, increase the oil’s dielectric strength value (BDV value) so as to improve the physical & chemical properties comparable to new transformer oil.

     The whole operation is fully automatically controlled by PLC System equipped with famous brand touch screen, all procedure are proceed by touch screen, easy and simple.

     

     Oil Result after Filtration                                            

    Moisture (Water Content)

    ≤ 5 PPM

    Gas Content

    ≤0.01% (Vol)

    Impurities Degree (Filtration precision)

    ≤ 5 micron (no free carbon)

    Breakdown Voltage (Dielectric)

    ≥70 KV

    Flash Point

    ≥145

    Cleanliness

    ≤NAS 1638 Grade 6


     High vacuum separating chambers, efficient oil film sprayer, increasing separating size and separating time to ensure the dry-level and dielectric strength improving greatly.

     Double-stage vacuum system, high vacuum pressure and high flow rate, strong power of vacuum evacuating

     Multi-stage precision filtration system, stainless steel material filters’ filtration combined with molecular adsorption technologies

     Duplex-Stereo film evaporation technology, combined with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil.

     UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effectively

     Besides the common vacuum oil purifier's function of dewatering, degassing and eliminating particles, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index like anti-oxides, acid-alkali water-solubility.

     Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.

     Double-infrared liquid level sensor and pressure protective system ensure machine operation easily and safely.

     Advanced dielectric Condenser devices and flow meter measuring the flow rate.

     Especially applied to vacuum oiling and drying (Hot Oil Circulation / on-site Drying) for power transmission equipments which are over 110KV

     Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.

     Low maintenance cost and time.

     

     

    Parameters

    Model

    Unit

    ZYD-P-30

    ZYD-P-50

    ZYD-P-100

    ZYD-P-150

    ZYD-P-200

    ZYD-P-250

    ZYD-P-300

    Flow Rate

    L/H

    1800

    3000

    6000

    9000

    12000

    15000

    18000

    Working Vacuum Degree

    MPa

    -0.08 ~ -0.099

    Working

    Discharge Pressure

    MPa

    ≤ 0.3

    Temperature

    Control Range

    20 ~ 80

    Operation Temperature

    40 ~ 70 (65℃ is best)

    Power Supply


    380V, 50Hz, 3 phases (or as per your requirements)

    Working hours

    without Trouble

    Hour

    4000

    Continuous Working Hours

    Hour

    150

    Ambient Temperature


    -25 ~ 55℃

    Working Noise

    dB(A)

    65 ~ 90

    Heating Power

    (adjusted available)

    KW

    30

    36

    48

    60

    72

    80

    120

    Total Power

    KW

    35.5

    42

    52.5

    68

    82

    93

    135

    Inlet/Outlet

    mm

    φ25

    φ32

    φ42

    φ50

    φ50

    φ60

    φ60

    Weight

    KGS

    600

    700

    1050

    1150

    1450

    1600

    1950

    Dimension

    Length

    mm

    1380

    1610

    1750

    1850

    1950

    2050

    2200

    Width

    mm

    1020

    1250

    1350

    1400

    1500

    1600

    1750

    Height

    mm

    1760

    1950

    2150

    2200

    2300

    2400

    2550

      Note:     1. The dimension and weight will be changed with changing of technical specs.

                    2. All the specs can be customized according to client's requirements.

     

        For more info, pls don't hesitate to contact us.

    CONTACT US
  • NO.5 Hongshi Street, Jiulongpo District, Chongqing, China
  • +86 135 2739 0908
  • +86 23 8823 9845
  • +86 23 8823 9845
  • Contact Us   Sitemap
  • Series ZYD-P Fully-automatic Transformer Oil Filtration Machine(with PLC system)

    Series ZYD-P Fully-automatic Transformer Oil Filtration Machine(with PLC system)

    Fully Automatic type Double-stage Vacuum Transformer Oil Filtration Machine 
    (Series ZYD-P) has been specially designed for on/off site 
    use to completely purify insulating oils in energized or de-energized transformers

    • Share This Post:

       The FUOOTECH Fully Automatic type Double-stage Vacuum Transformer Oil Filtration Machine (Series ZYD-P) has been specially designed for on/off site use to completely purify insulating oils in energized or de-energized transformers even when transformer power both below and above 100kva, 110KV and altitude over 500 meters, as well as purify mutual inductor oil, switch oil and so on.  Also it can fill the insulating oil into the transformers on-line and dry the transformer.

       The ZYD-P oil filtration machine not only provides regular oil filtration works such as degassing, dehydration and particles removal, but also can remove acidity, sludge, carbon deposits, sulfur, and other soluble oil decay products, increase the oil’s dielectric strength value (BDV value) so as to improve the physical & chemical properties comparable to new transformer oil.

       The whole operation is fully automatically controlled by PLC System equipped with famous brand touch screen, all procedure are proceed by touch screen, easy and simple.

       

       Oil Result after Filtration                                            

      Moisture (Water Content)

      ≤ 5 PPM

      Gas Content

      ≤0.01% (Vol)

      Impurities Degree (Filtration precision)

      ≤ 5 micron (no free carbon)

      Breakdown Voltage (Dielectric)

      ≥70 KV

      Flash Point

      ≥145

      Cleanliness

      ≤NAS 1638 Grade 6


       High vacuum separating chambers, efficient oil film sprayer, increasing separating size and separating time to ensure the dry-level and dielectric strength improving greatly.

       Double-stage vacuum system, high vacuum pressure and high flow rate, strong power of vacuum evacuating

       Multi-stage precision filtration system, stainless steel material filters’ filtration combined with molecular adsorption technologies

       Duplex-Stereo film evaporation technology, combined with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil.

       UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effectively

       Besides the common vacuum oil purifier's function of dewatering, degassing and eliminating particles, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index like anti-oxides, acid-alkali water-solubility.

       Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.

       Double-infrared liquid level sensor and pressure protective system ensure machine operation easily and safely.

       Advanced dielectric Condenser devices and flow meter measuring the flow rate.

       Especially applied to vacuum oiling and drying (Hot Oil Circulation / on-site Drying) for power transmission equipments which are over 110KV

       Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.

       Low maintenance cost and time.

       

       

      Parameters

      Model

      Unit

      ZYD-P-30

      ZYD-P-50

      ZYD-P-100

      ZYD-P-150

      ZYD-P-200

      ZYD-P-250

      ZYD-P-300

      Flow Rate

      L/H

      1800

      3000

      6000

      9000

      12000

      15000

      18000

      Working Vacuum Degree

      MPa

      -0.08 ~ -0.099

      Working

      Discharge Pressure

      MPa

      ≤ 0.3

      Temperature

      Control Range

      20 ~ 80

      Operation Temperature

      40 ~ 70 (65℃ is best)

      Power Supply


      380V, 50Hz, 3 phases (or as per your requirements)

      Working hours

      without Trouble

      Hour

      4000

      Continuous Working Hours

      Hour

      150

      Ambient Temperature


      -25 ~ 55℃

      Working Noise

      dB(A)

      65 ~ 90

      Heating Power

      (adjusted available)

      KW

      30

      36

      48

      60

      72

      80

      120

      Total Power

      KW

      35.5

      42

      52.5

      68

      82

      93

      135

      Inlet/Outlet

      mm

      φ25

      φ32

      φ42

      φ50

      φ50

      φ60

      φ60

      Weight

      KGS

      600

      700

      1050

      1150

      1450

      1600

      1950

      Dimension

      Length

      mm

      1380

      1610

      1750

      1850

      1950

      2050

      2200

      Width

      mm

      1020

      1250

      1350

      1400

      1500

      1600

      1750

      Height

      mm

      1760

      1950

      2150

      2200

      2300

      2400

      2550

        Note:     1. The dimension and weight will be changed with changing of technical specs.

                      2. All the specs can be customized according to client's requirements.

       

          For more info, pls don't hesitate to contact us.

    CONTACT US