Fuootech Oil Filtration Group
Series ZYD-U Ultra High Voltage Vacuum Transformer Oil Filtration Machine
  • Series ZYD-U Ultra High Voltage Vacuum Transformer Oil Filtration Machine

Series ZYD-U Ultra High Voltage Vacuum Transformer Oil Filtration Machine

Series ZYD-U Ultra High Voltage Oil Filtration Machine is specially designed for the filtration, dehydration and degasification of the insulating oils in these ultra high voltage electrical equipment.

  • Share This Post:

     Ultra High Voltage Grid is named as “Electrical High Way” which features big capacity, long distance and low loss. There are 750kV AC, 1000kV AC, ±660kv DC, ±880kV DC, etc… Considering ensuring its ultra high safety, it has extremely requirements on insulating oils using in the transformer, mutual inductor, and reactor.

     

     FUOOTECH’s Series ZYD-U Ultra High Voltage Oil Filtration Machine is specially designed for the filtration, dehydration and degasification of the insulating oils in these ultra high voltage electrical equipment. 

     

     The ZYD-U oil filtration machine not only provides regular oil filtration works such as degassing, dehydration and particles removal, but also can remove acidity, sludge, carbon deposits, sulfur, and other soluble oil decay products, increase the oil’s dielectric strength value (BDV value) so as to improve the physical & chemical properties comparable to new transformer oil. 

     Oil Result after Filtration                                              

    Moisture (Water Content)

    ≤ 3 PPM

    Gas Content

    ≤0.01% (Vol)

    Impurities Degree (Filtration precision)

    ≤ 1 micron (no free carbon)

    Granularity

    5 ~ 50μm (in 100ml oil sample) ≤ 500 Nos

    Breakdown Voltage (Dielectric)

    ≥73 KV

    Flash Point

    ≥145

    Cleanliness

    ≤NAS 1638 Grade 6

     

      Duplex 3D stereo-evaporation with big vacuum chamber, efficient oil film sprayer, eliminating the liquid water quickly, increasing separating size and separating time to ensure the dry-level and dielectric strength improving greatly.

      Double-stage vacuum system, high vacuum pressure and high flow rate, strong power of vacuum evacuating,

      Multi-stage precision filtration system, stainless steel material filters’ filtration combined with molecular adsorption technologies

      UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effectively

      Besides the common vacuum oil purifier's function of dewatering, degassing and eliminating particles, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index like anti-oxides, acid-alkali water-solubility.

      Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.

      Double-infrared liquid level sensor and pressure protective system ensure machine operation easily and safely.

      Advanced dielectric Condenser devices and flow meter measuring the flow rate.

      Especially applied to vacuum oiling and drying (Hot Oil Circulation / on-site Drying) for power transmission equipments which are over 550 KV

      Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.

      Low maintenance cost and time.

     

     

    Parameters

    Model

    Unit

    ZYD-U-100

    ZYD-U-150

    ZYD-U-200

    ZYD-U-300


    Flow Rate

    L/H

    6000

    9000

    12000

    18000


    Ultimate Vacuum Degree

    Pa

    ≤ 2


    Working Vacuum Degree

    Pa

    ≤ 30


    Working

    Discharge Pressure

    MPa

    ≤ 0.5


    Temperature

    Control Range

    20 ~ 80


    Operation Temperature

    40 ~ 65


    Power Supply


    380V, 50Hz, 3 phases (or as per your requirements)


    Ambient Temperature


    -25 ~ 55℃


    Working Noise

    dBA

    65 ~ 90


    Heating Power

    (adjusted available)

    KW

    66

    90

    132

    180


    Total Power

    KW

    72

    105

    150

    200


    Inlet/Outlet

    mm

    Φ32

    Φ40

    φ50

    φ65


    Weight

    Kg

    1200

    1600

    2200

    3000


    Dimension

    Length

    mm

    2200

    2500

    2850

    3600


    Width

    mm

    1700

    1950

    2050

    2500

    Height

    mm

    2450

    2500

    2600

    3100


    Note:       1. The dimension and weight will be changed with changing of technical specs.

                     2. All the specs can be customized according to client's requirements.

     

        For more info, pls don't hesitate to contact us.

Top
Series ZYD-U Ultra High Voltage Vacuum Transformer Oil Filtration Machine

Series ZYD-U Ultra High Voltage Vacuum Transformer Oil Filtration Machine

Series ZYD-U Ultra High Voltage Oil Filtration Machine is specially designed for the filtration, dehydration and degasification of the insulating oils in these ultra high voltage electrical equipment.

     Ultra High Voltage Grid is named as “Electrical High Way” which features big capacity, long distance and low loss. There are 750kV AC, 1000kV AC, ±660kv DC, ±880kV DC, etc… Considering ensuring its ultra high safety, it has extremely requirements on insulating oils using in the transformer, mutual inductor, and reactor.

     

     FUOOTECH’s Series ZYD-U Ultra High Voltage Oil Filtration Machine is specially designed for the filtration, dehydration and degasification of the insulating oils in these ultra high voltage electrical equipment. 

     

     The ZYD-U oil filtration machine not only provides regular oil filtration works such as degassing, dehydration and particles removal, but also can remove acidity, sludge, carbon deposits, sulfur, and other soluble oil decay products, increase the oil’s dielectric strength value (BDV value) so as to improve the physical & chemical properties comparable to new transformer oil. 

     Oil Result after Filtration                                              

    Moisture (Water Content)

    ≤ 3 PPM

    Gas Content

    ≤0.01% (Vol)

    Impurities Degree (Filtration precision)

    ≤ 1 micron (no free carbon)

    Granularity

    5 ~ 50μm (in 100ml oil sample) ≤ 500 Nos

    Breakdown Voltage (Dielectric)

    ≥73 KV

    Flash Point

    ≥145

    Cleanliness

    ≤NAS 1638 Grade 6

     

      Duplex 3D stereo-evaporation with big vacuum chamber, efficient oil film sprayer, eliminating the liquid water quickly, increasing separating size and separating time to ensure the dry-level and dielectric strength improving greatly.

      Double-stage vacuum system, high vacuum pressure and high flow rate, strong power of vacuum evacuating,

      Multi-stage precision filtration system, stainless steel material filters’ filtration combined with molecular adsorption technologies

      UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effectively

      Besides the common vacuum oil purifier's function of dewatering, degassing and eliminating particles, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index like anti-oxides, acid-alkali water-solubility.

      Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.

      Double-infrared liquid level sensor and pressure protective system ensure machine operation easily and safely.

      Advanced dielectric Condenser devices and flow meter measuring the flow rate.

      Especially applied to vacuum oiling and drying (Hot Oil Circulation / on-site Drying) for power transmission equipments which are over 550 KV

      Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.

      Low maintenance cost and time.

     

     

    Parameters

    Model

    Unit

    ZYD-U-100

    ZYD-U-150

    ZYD-U-200

    ZYD-U-300


    Flow Rate

    L/H

    6000

    9000

    12000

    18000


    Ultimate Vacuum Degree

    Pa

    ≤ 2


    Working Vacuum Degree

    Pa

    ≤ 30


    Working

    Discharge Pressure

    MPa

    ≤ 0.5


    Temperature

    Control Range

    20 ~ 80


    Operation Temperature

    40 ~ 65


    Power Supply


    380V, 50Hz, 3 phases (or as per your requirements)


    Ambient Temperature


    -25 ~ 55℃


    Working Noise

    dBA

    65 ~ 90


    Heating Power

    (adjusted available)

    KW

    66

    90

    132

    180


    Total Power

    KW

    72

    105

    150

    200


    Inlet/Outlet

    mm

    Φ32

    Φ40

    φ50

    φ65


    Weight

    Kg

    1200

    1600

    2200

    3000


    Dimension

    Length

    mm

    2200

    2500

    2850

    3600


    Width

    mm

    1700

    1950

    2050

    2500

    Height

    mm

    2450

    2500

    2600

    3100


    Note:       1. The dimension and weight will be changed with changing of technical specs.

                     2. All the specs can be customized according to client's requirements.

     

        For more info, pls don't hesitate to contact us.

    CONTACT US
  • NO.5 Hongshi Street, Jiulongpo District, Chongqing, China
  • +86 135 2739 0908
  • +86 23 8823 9845
  • +86 23 8823 9845
  • Contact Us   Sitemap
  • Series ZYD-U Ultra High Voltage Vacuum Transformer Oil Filtration Machine

    Series ZYD-U Ultra High Voltage Vacuum Transformer Oil Filtration Machine

    Series ZYD-U Ultra High Voltage Oil Filtration Machine is specially designed for the filtration, dehydration and degasification of the insulating oils in these ultra high voltage electrical equipment.

    • Share This Post:

       Ultra High Voltage Grid is named as “Electrical High Way” which features big capacity, long distance and low loss. There are 750kV AC, 1000kV AC, ±660kv DC, ±880kV DC, etc… Considering ensuring its ultra high safety, it has extremely requirements on insulating oils using in the transformer, mutual inductor, and reactor.

       

       FUOOTECH’s Series ZYD-U Ultra High Voltage Oil Filtration Machine is specially designed for the filtration, dehydration and degasification of the insulating oils in these ultra high voltage electrical equipment. 

       

       The ZYD-U oil filtration machine not only provides regular oil filtration works such as degassing, dehydration and particles removal, but also can remove acidity, sludge, carbon deposits, sulfur, and other soluble oil decay products, increase the oil’s dielectric strength value (BDV value) so as to improve the physical & chemical properties comparable to new transformer oil. 

       Oil Result after Filtration                                              

      Moisture (Water Content)

      ≤ 3 PPM

      Gas Content

      ≤0.01% (Vol)

      Impurities Degree (Filtration precision)

      ≤ 1 micron (no free carbon)

      Granularity

      5 ~ 50μm (in 100ml oil sample) ≤ 500 Nos

      Breakdown Voltage (Dielectric)

      ≥73 KV

      Flash Point

      ≥145

      Cleanliness

      ≤NAS 1638 Grade 6

       

        Duplex 3D stereo-evaporation with big vacuum chamber, efficient oil film sprayer, eliminating the liquid water quickly, increasing separating size and separating time to ensure the dry-level and dielectric strength improving greatly.

        Double-stage vacuum system, high vacuum pressure and high flow rate, strong power of vacuum evacuating,

        Multi-stage precision filtration system, stainless steel material filters’ filtration combined with molecular adsorption technologies

        UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effectively

        Besides the common vacuum oil purifier's function of dewatering, degassing and eliminating particles, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index like anti-oxides, acid-alkali water-solubility.

        Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.

        Double-infrared liquid level sensor and pressure protective system ensure machine operation easily and safely.

        Advanced dielectric Condenser devices and flow meter measuring the flow rate.

        Especially applied to vacuum oiling and drying (Hot Oil Circulation / on-site Drying) for power transmission equipments which are over 550 KV

        Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.

        Low maintenance cost and time.

       

       

      Parameters

      Model

      Unit

      ZYD-U-100

      ZYD-U-150

      ZYD-U-200

      ZYD-U-300


      Flow Rate

      L/H

      6000

      9000

      12000

      18000


      Ultimate Vacuum Degree

      Pa

      ≤ 2


      Working Vacuum Degree

      Pa

      ≤ 30


      Working

      Discharge Pressure

      MPa

      ≤ 0.5


      Temperature

      Control Range

      20 ~ 80


      Operation Temperature

      40 ~ 65


      Power Supply


      380V, 50Hz, 3 phases (or as per your requirements)


      Ambient Temperature


      -25 ~ 55℃


      Working Noise

      dBA

      65 ~ 90


      Heating Power

      (adjusted available)

      KW

      66

      90

      132

      180


      Total Power

      KW

      72

      105

      150

      200


      Inlet/Outlet

      mm

      Φ32

      Φ40

      φ50

      φ65


      Weight

      Kg

      1200

      1600

      2200

      3000


      Dimension

      Length

      mm

      2200

      2500

      2850

      3600


      Width

      mm

      1700

      1950

      2050

      2500

      Height

      mm

      2450

      2500

      2600

      3100


      Note:       1. The dimension and weight will be changed with changing of technical specs.

                       2. All the specs can be customized according to client's requirements.

       

          For more info, pls don't hesitate to contact us.

    CONTACT US