Fuootech Oil Filtration Group
Series FYZ OLTC (On Load Tap Changer) Insulation Oil Purifier
  • Series FYZ OLTC (On Load Tap Changer) Insulation Oil Purifier
  • Series FYZ OLTC (On Load Tap Changer) Insulation Oil Purifier
  • Series FYZ OLTC (On Load Tap Changer) Insulation Oil Purifier

Series FYZ OLTC (On Load Tap Changer) Insulation Oil Purifier

Series FYZ OLTC (On Load Tap Changer) Insulation Oil Purifier 
is mainly used in the bypass circulation filtering system of OLTC.

  • Share This Post:

     OLTC transformers regulate the system voltage while the transformer is under energy. They regulate the low and high voltage so they prevent the negative effects of voltage variation.

     OLTC transformers do not require maintenance for long time by using online oil Purifier .

     

     Series FYZ OLTC (On Load Tap Changer) Insulation Oil Purifier is mainly used in the bypass circulation filtering system of OLTC. It can timely filter the oil while the transformer operates normally, or it can automatically filter the oil after switching of the OLTC. This equipment can efficiently remove the impurities, dissociated free carbon, water and oxides to ensure the quality of oil, thus it can guarantee the oil’s insulation, increase the switching times, postpone the repairing period, decrease the power cut off times, ensure the voltage’s quality and improve the safety and reliability of the OLTC.

     

     Series FYZ is usually installed near the OLTC permanently (the hanging installation or fixed installation beside) as a special equipment. There are many kinds of models with different flow ratse and accessories with different functions for choices according to client’s actual need.

     Oil Result after Filtration                                           

    Moisture (Water Content)

    ≤ 20 PPM

    Impurities Degree (Filtration precision)

    ≤ 1 micron (no free carbon)

    Cleanliness

    ≤NAS 1638 Grade 6

     

     Work online with on-load working transformer or high voltage switch.

     High quality filters remove the particles & impurities effectively.

     All-weather Structure Case, Made of Stainless steel.

     Standard control box, made of Stainless steel.

     Remote Monitoring System (RMS) installed:  Displaying the filter’s status and machine operation status.

     Positive and negative direction control of the motor, protection of over-load of motor start and phase-lacking.

     Humidity relay, 50%-100% adjustable.

     Automatically run this machine once after the operation of OLTC, the operation time can be set according to requirement from 0-99 hours, but it is usually set as 30 minutes. Another way is to proceed the filtration works every day at the fixed time lasting two hours. The two ways can be chosen accordingly.

     Small volume, light weight, low maintenance cost and time.

     

     

    Item

    Name of Parameter

    type/ unit

    FYZ-10

    Technical Parameter

    Nominal flow rate

    L/min

    10

    (can be designed as per request)

    Working Pressure

    Mpa

    0.5

    Working power

     KW

    380VAC, 50Hz, 3 Phase, 4 Wires

    or as needed

    Total electric power

    KW

    0.75

    Diameter of inlet/Outlet hose

    DN mm

    25/25

    Dimension

    Length

    mm

    530

    Width

    mm

    350

    Height

    mm

    1000

    Weight

    KGS

    100

    After Filtration

    Filtering Accuracy

    micron

    ≤ 1

    Moisture (Water Content)

    PPM

    ≤ 20

    Cleanness

    NAS level

    ≤6

     Note:    1. The dimension and weight will be changed with changing of technical specs.

                  2. All the specs can be customized according to client's requirements.

        For more info, pls don't hesitate to contact us.

Top
Series FYZ OLTC (On Load Tap Changer) Insulation Oil Purifier

Series FYZ OLTC (On Load Tap Changer) Insulation Oil Purifier

Series FYZ OLTC (On Load Tap Changer) Insulation Oil Purifier 
is mainly used in the bypass circulation filtering system of OLTC.

     OLTC transformers regulate the system voltage while the transformer is under energy. They regulate the low and high voltage so they prevent the negative effects of voltage variation.

     OLTC transformers do not require maintenance for long time by using online oil Purifier .

     

     Series FYZ OLTC (On Load Tap Changer) Insulation Oil Purifier is mainly used in the bypass circulation filtering system of OLTC. It can timely filter the oil while the transformer operates normally, or it can automatically filter the oil after switching of the OLTC. This equipment can efficiently remove the impurities, dissociated free carbon, water and oxides to ensure the quality of oil, thus it can guarantee the oil’s insulation, increase the switching times, postpone the repairing period, decrease the power cut off times, ensure the voltage’s quality and improve the safety and reliability of the OLTC.

     

     Series FYZ is usually installed near the OLTC permanently (the hanging installation or fixed installation beside) as a special equipment. There are many kinds of models with different flow ratse and accessories with different functions for choices according to client’s actual need.

     Oil Result after Filtration                                           

    Moisture (Water Content)

    ≤ 20 PPM

    Impurities Degree (Filtration precision)

    ≤ 1 micron (no free carbon)

    Cleanliness

    ≤NAS 1638 Grade 6

     

     Work online with on-load working transformer or high voltage switch.

     High quality filters remove the particles & impurities effectively.

     All-weather Structure Case, Made of Stainless steel.

     Standard control box, made of Stainless steel.

     Remote Monitoring System (RMS) installed:  Displaying the filter’s status and machine operation status.

     Positive and negative direction control of the motor, protection of over-load of motor start and phase-lacking.

     Humidity relay, 50%-100% adjustable.

     Automatically run this machine once after the operation of OLTC, the operation time can be set according to requirement from 0-99 hours, but it is usually set as 30 minutes. Another way is to proceed the filtration works every day at the fixed time lasting two hours. The two ways can be chosen accordingly.

     Small volume, light weight, low maintenance cost and time.

     

     

    Item

    Name of Parameter

    type/ unit

    FYZ-10

    Technical Parameter

    Nominal flow rate

    L/min

    10

    (can be designed as per request)

    Working Pressure

    Mpa

    0.5

    Working power

     KW

    380VAC, 50Hz, 3 Phase, 4 Wires

    or as needed

    Total electric power

    KW

    0.75

    Diameter of inlet/Outlet hose

    DN mm

    25/25

    Dimension

    Length

    mm

    530

    Width

    mm

    350

    Height

    mm

    1000

    Weight

    KGS

    100

    After Filtration

    Filtering Accuracy

    micron

    ≤ 1

    Moisture (Water Content)

    PPM

    ≤ 20

    Cleanness

    NAS level

    ≤6

     Note:    1. The dimension and weight will be changed with changing of technical specs.

                  2. All the specs can be customized according to client's requirements.

        For more info, pls don't hesitate to contact us.

    CONTACT US
  • NO.5 Hongshi Street, Jiulongpo District, Chongqing, China
  • +86 135 2739 0908
  • +86 23 8823 9845
  • +86 23 8823 9845
  • Contact Us   Sitemap
  • Series FYZ OLTC (On Load Tap Changer) Insulation Oil Purifier

    Series FYZ OLTC (On Load Tap Changer) Insulation Oil Purifier

    Series FYZ OLTC (On Load Tap Changer) Insulation Oil Purifier 
    is mainly used in the bypass circulation filtering system of OLTC.

    • Share This Post:

       OLTC transformers regulate the system voltage while the transformer is under energy. They regulate the low and high voltage so they prevent the negative effects of voltage variation.

       OLTC transformers do not require maintenance for long time by using online oil Purifier .

       

       Series FYZ OLTC (On Load Tap Changer) Insulation Oil Purifier is mainly used in the bypass circulation filtering system of OLTC. It can timely filter the oil while the transformer operates normally, or it can automatically filter the oil after switching of the OLTC. This equipment can efficiently remove the impurities, dissociated free carbon, water and oxides to ensure the quality of oil, thus it can guarantee the oil’s insulation, increase the switching times, postpone the repairing period, decrease the power cut off times, ensure the voltage’s quality and improve the safety and reliability of the OLTC.

       

       Series FYZ is usually installed near the OLTC permanently (the hanging installation or fixed installation beside) as a special equipment. There are many kinds of models with different flow ratse and accessories with different functions for choices according to client’s actual need.

       Oil Result after Filtration                                           

      Moisture (Water Content)

      ≤ 20 PPM

      Impurities Degree (Filtration precision)

      ≤ 1 micron (no free carbon)

      Cleanliness

      ≤NAS 1638 Grade 6

       

       Work online with on-load working transformer or high voltage switch.

       High quality filters remove the particles & impurities effectively.

       All-weather Structure Case, Made of Stainless steel.

       Standard control box, made of Stainless steel.

       Remote Monitoring System (RMS) installed:  Displaying the filter’s status and machine operation status.

       Positive and negative direction control of the motor, protection of over-load of motor start and phase-lacking.

       Humidity relay, 50%-100% adjustable.

       Automatically run this machine once after the operation of OLTC, the operation time can be set according to requirement from 0-99 hours, but it is usually set as 30 minutes. Another way is to proceed the filtration works every day at the fixed time lasting two hours. The two ways can be chosen accordingly.

       Small volume, light weight, low maintenance cost and time.

       

       

      Item

      Name of Parameter

      type/ unit

      FYZ-10

      Technical Parameter

      Nominal flow rate

      L/min

      10

      (can be designed as per request)

      Working Pressure

      Mpa

      0.5

      Working power

       KW

      380VAC, 50Hz, 3 Phase, 4 Wires

      or as needed

      Total electric power

      KW

      0.75

      Diameter of inlet/Outlet hose

      DN mm

      25/25

      Dimension

      Length

      mm

      530

      Width

      mm

      350

      Height

      mm

      1000

      Weight

      KGS

      100

      After Filtration

      Filtering Accuracy

      micron

      ≤ 1

      Moisture (Water Content)

      PPM

      ≤ 20

      Cleanness

      NAS level

      ≤6

       Note:    1. The dimension and weight will be changed with changing of technical specs.

                    2. All the specs can be customized according to client's requirements.

          For more info, pls don't hesitate to contact us.

    CONTACT US