Fuootech Oil Filtration Group
Series FTY-P Fully Automatic Type Vacuum Turbine Oil Purifier
  • Series FTY-P Fully Automatic Type Vacuum Turbine Oil Purifier
  • Series FTY-P Fully Automatic Type Vacuum Turbine Oil Purifier

Series FTY-P Fully Automatic Type Vacuum Turbine Oil Purifier

Series FTY-P equipped with PLC system is specially for 
purifying various unqualified turbine oil from steam 
turbine system, gas turbine system & Fans

  • Share This Post:

     The oil used for lubrication system of turbine generators need maintenance and treatment because it may be mixed with air, water and impurities. Otherwise, it can speed up oil quality turning bad or break down the adjuster and protection system, damage the plain journal bearing, and influence the whole machine running. 

     

     Series FTY-P Fully Automatic Type Vacuum Turbine Oil Purifier, developed based on FTY Series and equipped with PLC controlling system, is specially designed for purifying various unqualified turbine oil (such as ISO – VG – 46, 32, 68, etc.) from steam turbine system, gas turbine system & Fans, especially for serious emulsion turbine oil, it can quickly and efficiently break emulsification, separate water, gas, particles from oil fully automatically controlled by PLC.   

     

     This equipment use a special polymer materials as filter medium combined with vacuum separating technology to break emulsification, dewater, degas, remove acid and particles, make the badly turbid turbine oil becomes clean.  Series FTY-P is a perfect turbine oil purifier for live line work; also it can purify low viscosity hydraulic oil and lube oil.

     

     Oil Result after Purification

    Moisture   (Water Content)

    ≤ 80 PPM

    Gas Content

    ≤0.1%

    Filtering   Accuracy

    ≤ 5 micron

    Demulsification   Value

    ≤12 min (GB/F 7305)

    Cleanliness

    ≤NAS 1638 Grade 6

     

     Equipped with PLC controlling system, making the whole operation fully automatically.

      Special polymer materials as filter medium with the functions of broken emulsification thoroughly, dewatering, removing particles

     Duplex 3D Stereo-evaporation technology, equips with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil.

     With distinctive removing impurities technique filtering through double FH trapezoidal network and absorbing by high polymer material, this machine can make the ß3 equal or surpass 200 and make the cleanness lower grade 6(NAS1638).

     Multi-stage precision filtration process remove large quantity of particles & impurities from the oil.

     Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.

     Double-infrared liquid level sensor, pressure protective system to ensure machine operation easy and safely.

     Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.

     Can work online with stream turbine and hydraulic turbine.

     

    Item

    Unit

    FTY-P-10

    FTY-P -20

    FTY-P -30

    FTY-P -50

    FTY-P -100

    FTY-P -150

    FTY-P -200

    FTY-P -300

    Flow rate

    L/hr

    600

    1200

    1800

    3000

    6000

    9000

    12000

    18000

    Working Vacuum   Degree

    MPa

    -0.06 ~ -0.095

    Working Pressure

    MPa

        ≤ 0.3

    Temperature Range

    20 ~ 80  

    Power Supply


    380 VAC, 3 Phase,   50 Hz (or as per requirement)

    Heating power

    kW

    12

    15

    24

    30

    45

    60

    72

    84

    Total power

    kW

    14

    17

    26

    33

    48

    66

    81

    97

    Inlet/outlet   caliber

    mm

    Ф25

    Ф25

    Ф25

    Ф32

    Ф42

    Ф42

    Ф50

    Ф65

    Weight

    kg

    400

    450

    500

    600

    700

    900

    1200

    1550

    Dimension

    Length

    mm

    1280

    1350

    1350

    1400

    1500

    1500

    1750

    1950

    Width

    mm

    750

    900

    950

    950

    1000

    1200

    1450

    1630

    Height

    mm

    1450

    1450

    1500

    1600

    1650

    1800

    1950

    2090

      Note:   1. The dimension and weight will be changed with changing of technical specs.

                  2. All the specs can be customized according to client's requirements.

     

        For more info, pls don't hesitate to contact us.

Top
Series FTY-P Fully Automatic Type Vacuum Turbine Oil Purifier

Series FTY-P Fully Automatic Type Vacuum Turbine Oil Purifier

Series FTY-P equipped with PLC system is specially for 
purifying various unqualified turbine oil from steam 
turbine system, gas turbine system & Fans

     The oil used for lubrication system of turbine generators need maintenance and treatment because it may be mixed with air, water and impurities. Otherwise, it can speed up oil quality turning bad or break down the adjuster and protection system, damage the plain journal bearing, and influence the whole machine running. 

     

     Series FTY-P Fully Automatic Type Vacuum Turbine Oil Purifier, developed based on FTY Series and equipped with PLC controlling system, is specially designed for purifying various unqualified turbine oil (such as ISO – VG – 46, 32, 68, etc.) from steam turbine system, gas turbine system & Fans, especially for serious emulsion turbine oil, it can quickly and efficiently break emulsification, separate water, gas, particles from oil fully automatically controlled by PLC.   

     

     This equipment use a special polymer materials as filter medium combined with vacuum separating technology to break emulsification, dewater, degas, remove acid and particles, make the badly turbid turbine oil becomes clean.  Series FTY-P is a perfect turbine oil purifier for live line work; also it can purify low viscosity hydraulic oil and lube oil.

     

     Oil Result after Purification

    Moisture   (Water Content)

    ≤ 80 PPM

    Gas Content

    ≤0.1%

    Filtering   Accuracy

    ≤ 5 micron

    Demulsification   Value

    ≤12 min (GB/F 7305)

    Cleanliness

    ≤NAS 1638 Grade 6

     

     Equipped with PLC controlling system, making the whole operation fully automatically.

      Special polymer materials as filter medium with the functions of broken emulsification thoroughly, dewatering, removing particles

     Duplex 3D Stereo-evaporation technology, equips with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil.

     With distinctive removing impurities technique filtering through double FH trapezoidal network and absorbing by high polymer material, this machine can make the ß3 equal or surpass 200 and make the cleanness lower grade 6(NAS1638).

     Multi-stage precision filtration process remove large quantity of particles & impurities from the oil.

     Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.

     Double-infrared liquid level sensor, pressure protective system to ensure machine operation easy and safely.

     Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.

     Can work online with stream turbine and hydraulic turbine.

     

    Item

    Unit

    FTY-P-10

    FTY-P -20

    FTY-P -30

    FTY-P -50

    FTY-P -100

    FTY-P -150

    FTY-P -200

    FTY-P -300

    Flow rate

    L/hr

    600

    1200

    1800

    3000

    6000

    9000

    12000

    18000

    Working Vacuum   Degree

    MPa

    -0.06 ~ -0.095

    Working Pressure

    MPa

        ≤ 0.3

    Temperature Range

    20 ~ 80  

    Power Supply


    380 VAC, 3 Phase,   50 Hz (or as per requirement)

    Heating power

    kW

    12

    15

    24

    30

    45

    60

    72

    84

    Total power

    kW

    14

    17

    26

    33

    48

    66

    81

    97

    Inlet/outlet   caliber

    mm

    Ф25

    Ф25

    Ф25

    Ф32

    Ф42

    Ф42

    Ф50

    Ф65

    Weight

    kg

    400

    450

    500

    600

    700

    900

    1200

    1550

    Dimension

    Length

    mm

    1280

    1350

    1350

    1400

    1500

    1500

    1750

    1950

    Width

    mm

    750

    900

    950

    950

    1000

    1200

    1450

    1630

    Height

    mm

    1450

    1450

    1500

    1600

    1650

    1800

    1950

    2090

      Note:   1. The dimension and weight will be changed with changing of technical specs.

                  2. All the specs can be customized according to client's requirements.

     

        For more info, pls don't hesitate to contact us.

    CONTACT US
  • NO.5 Hongshi Street, Jiulongpo District, Chongqing, China
  • +86 135 2739 0908
  • +86 23 8823 9845
  • +86 23 8823 9845
  • Contact Us   Sitemap
  • Series FTY-P Fully Automatic Type Vacuum Turbine Oil Purifier

    Series FTY-P Fully Automatic Type Vacuum Turbine Oil Purifier

    Series FTY-P equipped with PLC system is specially for 
    purifying various unqualified turbine oil from steam 
    turbine system, gas turbine system & Fans

    • Share This Post:

       The oil used for lubrication system of turbine generators need maintenance and treatment because it may be mixed with air, water and impurities. Otherwise, it can speed up oil quality turning bad or break down the adjuster and protection system, damage the plain journal bearing, and influence the whole machine running. 

       

       Series FTY-P Fully Automatic Type Vacuum Turbine Oil Purifier, developed based on FTY Series and equipped with PLC controlling system, is specially designed for purifying various unqualified turbine oil (such as ISO – VG – 46, 32, 68, etc.) from steam turbine system, gas turbine system & Fans, especially for serious emulsion turbine oil, it can quickly and efficiently break emulsification, separate water, gas, particles from oil fully automatically controlled by PLC.   

       

       This equipment use a special polymer materials as filter medium combined with vacuum separating technology to break emulsification, dewater, degas, remove acid and particles, make the badly turbid turbine oil becomes clean.  Series FTY-P is a perfect turbine oil purifier for live line work; also it can purify low viscosity hydraulic oil and lube oil.

       

       Oil Result after Purification

      Moisture   (Water Content)

      ≤ 80 PPM

      Gas Content

      ≤0.1%

      Filtering   Accuracy

      ≤ 5 micron

      Demulsification   Value

      ≤12 min (GB/F 7305)

      Cleanliness

      ≤NAS 1638 Grade 6

       

       Equipped with PLC controlling system, making the whole operation fully automatically.

        Special polymer materials as filter medium with the functions of broken emulsification thoroughly, dewatering, removing particles

       Duplex 3D Stereo-evaporation technology, equips with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil.

       With distinctive removing impurities technique filtering through double FH trapezoidal network and absorbing by high polymer material, this machine can make the ß3 equal or surpass 200 and make the cleanness lower grade 6(NAS1638).

       Multi-stage precision filtration process remove large quantity of particles & impurities from the oil.

       Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.

       Double-infrared liquid level sensor, pressure protective system to ensure machine operation easy and safely.

       Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.

       Can work online with stream turbine and hydraulic turbine.

       

      Item

      Unit

      FTY-P-10

      FTY-P -20

      FTY-P -30

      FTY-P -50

      FTY-P -100

      FTY-P -150

      FTY-P -200

      FTY-P -300

      Flow rate

      L/hr

      600

      1200

      1800

      3000

      6000

      9000

      12000

      18000

      Working Vacuum   Degree

      MPa

      -0.06 ~ -0.095

      Working Pressure

      MPa

          ≤ 0.3

      Temperature Range

      20 ~ 80  

      Power Supply


      380 VAC, 3 Phase,   50 Hz (or as per requirement)

      Heating power

      kW

      12

      15

      24

      30

      45

      60

      72

      84

      Total power

      kW

      14

      17

      26

      33

      48

      66

      81

      97

      Inlet/outlet   caliber

      mm

      Ф25

      Ф25

      Ф25

      Ф32

      Ф42

      Ф42

      Ф50

      Ф65

      Weight

      kg

      400

      450

      500

      600

      700

      900

      1200

      1550

      Dimension

      Length

      mm

      1280

      1350

      1350

      1400

      1500

      1500

      1750

      1950

      Width

      mm

      750

      900

      950

      950

      1000

      1200

      1450

      1630

      Height

      mm

      1450

      1450

      1500

      1600

      1650

      1800

      1950

      2090

        Note:   1. The dimension and weight will be changed with changing of technical specs.

                    2. All the specs can be customized according to client's requirements.

       

          For more info, pls don't hesitate to contact us.

    CONTACT US