Fuootech Oil Filtration Group
FUOOTECH Series FCF Centrifugal Oil Purifier Centrifuging Oil Water Separator
  • FUOOTECH Series FCF Centrifugal Oil Purifier Centrifuging Oil Water Separator
  • FUOOTECH Series FCF Centrifugal Oil Purifier Centrifuging Oil Water Separator
  • FUOOTECH Series FCF Centrifugal Oil Purifier Centrifuging Oil Water Separator

FUOOTECH Series FCF Centrifugal Oil Purifier Centrifuging Oil Water Separator

Series FCF Centrifugal Oil Purifier is designed for 
the Purification, concentration, clarification of mineral oils 
such as fuel oil, light oil, diesel oil, lubricating oil, 
turbine oil, hydraulic and work shop oils, vegetable oil, etc.

  • Share This Post:

    Series FCF Centrifugal Oil Purifier is designed for the Purification, concentration, clarification of mineral oils such as fuel oil, light oil, diesel oil, lubricating oil, turbine oil, hydraulic and work shop oils, vegetable oil, etc.


    Series FCF is mainly used to remove water, particles and mechanical impurities from diesel oil, lubricating oil and other mineral oil so as to reduce wear of the diesel engine and other machines, and prolong engine life. 

    Centrifugal oil purifier- FUOOTECH

    1. High effective Filtration System. Adopting progressive filtering tech, the best precision can be upto 0.5 micron, which can remove more than 99.99% of impurities from the oil.

    2. High density heater system, which can speed up water removal by increasing oil temperature that can help water molecule get away from oil molecule more quickly after get heating. But over-heating may damage the oil's quality, FUOOTECH choose the high density heater system to solve this matter, making the heating load less than 1.5W/cm2, stable temperature controller controls the oil heating temperature automatically, safe and reliable.

    3. With famous brands of Electrical components and protection system for over-voltage, over-current, over-load, phases lacking, etc., any problems happen, the whole machine stops automatically.

    4. Advanced protection for blockage on oil inlet point where vacuum transmitter is installed, if it's blocked, machine will stop automatically.

    5. PLC system is installed, making the whole operation fully automatically, and PLC display screen shows all the operation status and any problem .

    6. Able to be equipped with Heat recovery device as optional.

    7. Low maintenance time and cost.

    Centrifugal oil purifier- FUOOTECH

     Treatment capacity: 1200 ~ 7000 LPH
     Heater Power:  30 ~ 120KW or above, as per request
     Operation mode: continuous working
     Continuous working hours: ≥150 hours
     Avg. working hours without troubles: ≥5000 hours
     Used Oil Viscosity:   2 ~ 220 mm2/s


     Working pressure:  ≤0.3 MPa
     Heater temp.:  40 ~ 70 ºC
    Power Supply  380V, 50Hz, 3Ph
     Drum Rotating Speed:   6200 ~ 9000 rpm or as per request
    Water content (after purification):  ≤50ppm
    Purification particle precision (after purification):  ≤5 micron
    Cleanliness (after purification): ≤6 NAS1638 


     Packing & Delivery

    Packing- FUOOTECH

    Some overseas technical cooperation and training- FUOOTECH

     

    CONTACT US
  • NO.5 Hongshi Street, Jiulongpo District, Chongqing, China
  • +86 135 2739 0908
  • +86 23 8823 9845
  • +86 23 8823 9845
  •        info#fuootech.com
           (please change # to @ when you need send us inquiries by email.)
Top
FUOOTECH Series FCF Centrifugal Oil Purifier Centrifuging Oil Water Separator

FUOOTECH Series FCF Centrifugal Oil Purifier Centrifuging Oil Water Separator

Series FCF Centrifugal Oil Purifier is designed for 
the Purification, concentration, clarification of mineral oils 
such as fuel oil, light oil, diesel oil, lubricating oil, 
turbine oil, hydraulic and work shop oils, vegetable oil, etc.

    Series FCF Centrifugal Oil Purifier is designed for the Purification, concentration, clarification of mineral oils such as fuel oil, light oil, diesel oil, lubricating oil, turbine oil, hydraulic and work shop oils, vegetable oil, etc.


    Series FCF is mainly used to remove water, particles and mechanical impurities from diesel oil, lubricating oil and other mineral oil so as to reduce wear of the diesel engine and other machines, and prolong engine life. 

    Centrifugal oil purifier- FUOOTECH

    1. High effective Filtration System. Adopting progressive filtering tech, the best precision can be upto 0.5 micron, which can remove more than 99.99% of impurities from the oil.

    2. High density heater system, which can speed up water removal by increasing oil temperature that can help water molecule get away from oil molecule more quickly after get heating. But over-heating may damage the oil's quality, FUOOTECH choose the high density heater system to solve this matter, making the heating load less than 1.5W/cm2, stable temperature controller controls the oil heating temperature automatically, safe and reliable.

    3. With famous brands of Electrical components and protection system for over-voltage, over-current, over-load, phases lacking, etc., any problems happen, the whole machine stops automatically.

    4. Advanced protection for blockage on oil inlet point where vacuum transmitter is installed, if it's blocked, machine will stop automatically.

    5. PLC system is installed, making the whole operation fully automatically, and PLC display screen shows all the operation status and any problem .

    6. Able to be equipped with Heat recovery device as optional.

    7. Low maintenance time and cost.

    Centrifugal oil purifier- FUOOTECH

     Treatment capacity: 1200 ~ 7000 LPH
     Heater Power:  30 ~ 120KW or above, as per request
     Operation mode: continuous working
     Continuous working hours: ≥150 hours
     Avg. working hours without troubles: ≥5000 hours
     Used Oil Viscosity:   2 ~ 220 mm2/s


     Working pressure:  ≤0.3 MPa
     Heater temp.:  40 ~ 70 ºC
    Power Supply  380V, 50Hz, 3Ph
     Drum Rotating Speed:   6200 ~ 9000 rpm or as per request
    Water content (after purification):  ≤50ppm
    Purification particle precision (after purification):  ≤5 micron
    Cleanliness (after purification): ≤6 NAS1638 


     Packing & Delivery

    Packing- FUOOTECH

    Some overseas technical cooperation and training- FUOOTECH

     

    CONTACT US
  • NO.5 Hongshi Street, Jiulongpo District, Chongqing, China
  • +86 135 2739 0908
  • +86 23 8823 9845
  • +86 23 8823 9845
  • Contact Us   Sitemap
  • FUOOTECH Series FCF Centrifugal Oil Purifier Centrifuging Oil Water Separator

    FUOOTECH Series FCF Centrifugal Oil Purifier Centrifuging Oil Water Separator

    Series FCF Centrifugal Oil Purifier is designed for 
    the Purification, concentration, clarification of mineral oils 
    such as fuel oil, light oil, diesel oil, lubricating oil, 
    turbine oil, hydraulic and work shop oils, vegetable oil, etc.

    • Share This Post:

      Series FCF Centrifugal Oil Purifier is designed for the Purification, concentration, clarification of mineral oils such as fuel oil, light oil, diesel oil, lubricating oil, turbine oil, hydraulic and work shop oils, vegetable oil, etc.


      Series FCF is mainly used to remove water, particles and mechanical impurities from diesel oil, lubricating oil and other mineral oil so as to reduce wear of the diesel engine and other machines, and prolong engine life. 

      Centrifugal oil purifier- FUOOTECH

      1. High effective Filtration System. Adopting progressive filtering tech, the best precision can be upto 0.5 micron, which can remove more than 99.99% of impurities from the oil.

      2. High density heater system, which can speed up water removal by increasing oil temperature that can help water molecule get away from oil molecule more quickly after get heating. But over-heating may damage the oil's quality, FUOOTECH choose the high density heater system to solve this matter, making the heating load less than 1.5W/cm2, stable temperature controller controls the oil heating temperature automatically, safe and reliable.

      3. With famous brands of Electrical components and protection system for over-voltage, over-current, over-load, phases lacking, etc., any problems happen, the whole machine stops automatically.

      4. Advanced protection for blockage on oil inlet point where vacuum transmitter is installed, if it's blocked, machine will stop automatically.

      5. PLC system is installed, making the whole operation fully automatically, and PLC display screen shows all the operation status and any problem .

      6. Able to be equipped with Heat recovery device as optional.

      7. Low maintenance time and cost.

      Centrifugal oil purifier- FUOOTECH

       Treatment capacity: 1200 ~ 7000 LPH
       Heater Power:  30 ~ 120KW or above, as per request
       Operation mode: continuous working
       Continuous working hours: ≥150 hours
       Avg. working hours without troubles: ≥5000 hours
       Used Oil Viscosity:   2 ~ 220 mm2/s


       Working pressure:  ≤0.3 MPa
       Heater temp.:  40 ~ 70 ºC
      Power Supply  380V, 50Hz, 3Ph
       Drum Rotating Speed:   6200 ~ 9000 rpm or as per request
      Water content (after purification):  ≤50ppm
      Purification particle precision (after purification):  ≤5 micron
      Cleanliness (after purification): ≤6 NAS1638 


       Packing & Delivery

      Packing- FUOOTECH

      Some overseas technical cooperation and training- FUOOTECH

       

    CONTACT US
    • NO.5 Hongshi Street, Jiulongpo District, Chongqing, China
    • +86-135 2739 0908
    • +86 23 8823 9845
    • +86 23 8823 9845
    •        info#fuootech.com
             (please change # to @ when you need send us inquiries by email.)