Since the establishment, our company has always adopted the corporate culture spirit of "diligence, sincerity and trust" to win the support and trust of the majority of customers in the society and establish a good image in the industry of Automatic Tensiometer, Petroleum acidity tester, Density Testing Instrument. The company is willing to cooperate sincerely with colleagues from all walks of life to create brilliant. We pay strict attention to quality management and keep learning advanced management experience. The company insists on being market-oriented and continues to create value based on customer needs and cutting-edge technology. It is our constant pursuit to reward our customers and society with the best products, and it is also the value of our existence in the past, present and future.
1. Introduction
The FUOOTECH Independent transformer oil regeneration product line brings your transformer's insulating fluids back to life and restores them to their optimum condition.
FUOOTECH's TOR Transformer Oil Regeneration System utilizes physiochemical means to recover deteriorated transformer oil and breaker oil while removing the acid content, suspended matter and precipitated residues from the oil. It utilizes a special purification, which allows transformer to stay running in normal manner without switch off of power and change of oil.
The basic content and anti-oxygenic property of oil remains the same after treatment, and is brought back to the specification of new oil. Insulator property and safety of equipment are enhanced while cost is reduced by 90%, compared with conventional way of oil-change.
It is recommended to use the transformer oil filtration machine firstly, when the oil withstand-voltage is treated at an acceptable range by the transformer oil filtration machine, and then use this TOR Transformer Oil Regeneration Device to recover the electrical properties of the aging insulating oil, you will find that the effect will be better.
2. Through TOR Oil reconditioning system, the following results are achieved:
• The moisture content in the oil is reduced to below 10 ppm.
• The acidity value is reduced to less than 0.03 mg KOH/g oil.
• The dielectric strength (BDV) is improved to better than 60 – 70 kv
• The IFT (Interfacial tension) is improved to up to 40 Dynes.
• The Tan Delta (tgδ 90℃) of the oil is improved to equal or less than 0.005.
• Sludges dissolved or in suspension in the oil as well as sludge deposits are removed.
• Particulate removal to 1 micron is achieved
• The oxidation stability of the oil restored to equal that of new oil.
• The color of the oil is improved.
• The dielectric strength of the solid insulation is improved.
• Degradation of the solid insulation has been halted.
3. Oil Comparasion Before and After Regeneration
4. Technical Parameters
Items |
Unit |
TOR-50 |
TOR-100 |
TOR-150 |
||
Flow rate |
L/H |
3,000 |
6,000 |
≥ 9,000 |
||
Flash point (Closed cup) |
℃ |
≥135 |
||||
Dielectric strength (break-down voltage) |
kV |
≥65 |
||||
Dielectric Loss Factors |
tgQ(90℃)% |
≤0.005 |
||||
Filtration Precision |
µm |
≤5 |
||||
Acidity |
mgKOH/g |
≤0.03 |
||||
Power Supply |
380V, 50HZ, 3Ph (or as per request) |
|||||
Working Pressure |
≤0.3MPa |
|||||
Motor Power |
KW |
1.1 |
2.2 |
4 |
||
Heating Power (Optional) |
KW |
30 |
48 |
90 |
||
Weight |
KGS |
254 |
430 |
600 |
||
Dimension(L×W×H) |
mm |
1200×650×1300 |
1250×800×1350 |
1300×950×1450 |
Note: 1. The dimension and weight will be changed with changing of technical specs.
2. All the specs can be customized according to client's requirements.
5. Main Features & Characteristics
1) No oil heating (if heater is not required)
2) No oil vacuuming (if vacuum process is not required)
3) New oil not required, thus saving resources
4) Cost effective
5) Ecology friendly (zero gas emission and no disposal of waste oil)
6) Transformer washing not required
7) No exposing of transformer core to atmosphere
8) Low energy consumption
9) Simple machinery construction
10) Simple handling
11) Easy installation
12) Minimum supervision
13) Field operation in all weather conditions, mobile trailer mounted and fully enclosure parts are optional
14) Minimal power consumption
6. Flow Diagram
7. Packing, Delivery, Shipping and Payment
8. Onsite Projects
9. Certificates
10. Our Advantages
1) 19 years experience in developping and manufacturing according to related China and internatinoal standards
2) Choose Higher quality raw material from the demostic and worldwide market
3) Own complete and advanced production facilities
4) Has the strict test procedures on raw materials and products from A to Z.
5) Have passed CE, ISO certificates
6) Longer warranty period for all our products (2 Years)
7) Factory Direct Sale, More competitive price
8) Variety types for selection and OEM & ODM are available
Our company pursues the corporate tenet of 'we help customers develop, customers help us survive', and will continue to provide domestic and foreign customers with BOD Series 5 Tons Per Day Waste Oil Recycling Used Motor Engine Oil Distillation Refining Machine of various specifications with excellent quality and competitive prices. Being different from others is the criterion for our progress and defines our position in the market. No matter the quantity of order, we give back to the customer with the best service and price. Delivery on time, honesty is our real answer to customers.
Hot Tags: bz independent oil regeneration system, China, suppliers, manufacturers, customized, price, in stock, buy discount, Insulation Resistance Tester, 2 stage vacuum pump, cooking oil filtration, turbine oil dehydration plant, oil purification machine, Transformer Winding Resistance Tester