We uphold a consistent level of professionalism, quality, credibility and repair for portable oil filter, Hand Held Filter Cart, Ultra low frequency high voltage generator. Quality is an important guarantee for an enterprise to be based on the market. We passionately follow the philosophy of building long term relationship with our associates, customers, suppliers and employees and have strong bonds of trust, mutual understanding and reliability. Over the years we have always taken ecological civilization and environmental protection as our responsibility.
1. Introduction
The FUOOTECH Independent transformer oil regeneration product line brings your transformer's insulating fluids back to life and restores them to their optimum condition.
FUOOTECH's TOR Transformer Oil Regeneration System utilizes physiochemical means to recover deteriorated transformer oil and breaker oil while removing the acid content, suspended matter and precipitated residues from the oil. It utilizes a special purification, which allows transformer to stay running in normal manner without switch off of power and change of oil.
The basic content and anti-oxygenic property of oil remains the same after treatment, and is brought back to the specification of new oil. Insulator property and safety of equipment are enhanced while cost is reduced by 90%, compared with conventional way of oil-change.
It is recommended to use the transformer oil filtration machine firstly, when the oil withstand-voltage is treated at an acceptable range by the transformer oil filtration machine, and then use this TOR Transformer Oil Regeneration Device to recover the electrical properties of the aging insulating oil, you will find that the effect will be better.
2. Through TOR Oil reconditioning system, the following results are achieved:
• The moisture content in the oil is reduced to below 10 ppm.
• The acidity value is reduced to less than 0.03 mg KOH/g oil.
• The dielectric strength (BDV) is improved to better than 60 – 70 kv
• The IFT (Interfacial tension) is improved to up to 40 Dynes.
• The Tan Delta (tgδ 90℃) of the oil is improved to equal or less than 0.005.
• Sludges dissolved or in suspension in the oil as well as sludge deposits are removed.
• Particulate removal to 1 micron is achieved
• The oxidation stability of the oil restored to equal that of new oil.
• The color of the oil is improved.
• The dielectric strength of the solid insulation is improved.
• Degradation of the solid insulation has been halted.
3. Oil Comparasion Before and After Regeneration
4. Technical Parameters
Items |
Unit |
TOR-50 |
TOR-100 |
TOR-150 |
||
Flow rate |
L/H |
3,000 |
6,000 |
≥ 9,000 |
||
Flash point (Closed cup) |
℃ |
≥135 |
||||
Dielectric strength (break-down voltage) |
kV |
≥65 |
||||
Dielectric Loss Factors |
tgQ(90℃)% |
≤0.005 |
||||
Filtration Precision |
µm |
≤5 |
||||
Acidity |
mgKOH/g |
≤0.03 |
||||
Power Supply |
380V, 50HZ, 3Ph (or as per request) |
|||||
Working Pressure |
≤0.3MPa |
|||||
Motor Power |
KW |
1.1 |
2.2 |
4 |
||
Heating Power (Optional) |
KW |
30 |
48 |
90 |
||
Weight |
KGS |
254 |
430 |
600 |
||
Dimension(L×W×H) |
mm |
1200×650×1300 |
1250×800×1350 |
1300×950×1450 |
Note: 1. The dimension and weight will be changed with changing of technical specs.
2. All the specs can be customized according to client's requirements.
5. Main Features & Characteristics
1) No oil heating (if heater is not required)
2) No oil vacuuming (if vacuum process is not required)
3) New oil not required, thus saving resources
4) Cost effective
5) Ecology friendly (zero gas emission and no disposal of waste oil)
6) Transformer washing not required
7) No exposing of transformer core to atmosphere
8) Low energy consumption
9) Simple machinery construction
10) Simple handling
11) Easy installation
12) Minimum supervision
13) Field operation in all weather conditions, mobile trailer mounted and fully enclosure parts are optional
14) Minimal power consumption
6. Flow Diagram
7. Packing, Delivery, Shipping and Payment
8. Onsite Projects
9. Certificates
10. Our Advantages
1) 19 years experience in developping and manufacturing according to related China and internatinoal standards
2) Choose Higher quality raw material from the demostic and worldwide market
3) Own complete and advanced production facilities
4) Has the strict test procedures on raw materials and products from A to Z.
5) Have passed CE, ISO certificates
6) Longer warranty period for all our products (2 Years)
7) Factory Direct Sale, More competitive price
8) Variety types for selection and OEM & ODM are available
In the fierce global competition, we have rapidly developed technologies and Equipment for Pasting Kraft Paper (DDP paper) and Strips with independent intellectual property rights to enhance our comprehensive strength. Our company is moving forward with a new attitude and a more mature and steady pace to satisfy customers and serve the society for the purpose of seeking better and faster development. From a broader perspective, more comprehensive areas, more critical links, we are gradually building a low-carbon, safe and efficient production system.
Hot Tags: bz independent oil regeneration system, China, suppliers, manufacturers, customized, price, in stock, buy discount, liquid filling machine, high vacuum oil water separation, vacuum pump system, kinematic viscosity testing apparatus, palm oil recycling system, oil tan delta and resistivity test kit