With our advanced technology, our company is a leader in developing environmentally friendly dc resistance bridge, Transformer Oil Dissolved Gas Analyzer, tan delta test equipment. We have standardized workshops and advanced production equipment of various technical levels, and can produce products that meet customer requirements at any time according to the needs of customers. Every day our products flow from our factories to all over the world. Our company continues to improve the technology content of products and produce high value-added products, comprehensively enhance the brand image of our company, expand the market share of high-end products, so as to improve the efficiency of our company. We take the synergistic and efficient organizational system and working mechanism as the guarantee to ensure the company's management interface is clear and the system operation risk is reduced.
1. Introduction
Series FTEE Online PPM Moisture Content Meter/ online Transformer oil water content analyzer/ moisture in oil transmitter is specially designed for the measurement of water content in oil or in the air. It is optimized for use in lubrication, hydraulic and insulation oils, as well as diesel fuel.
Series FTEE is ideal for online monitoring of moisture in lubrication or insulation oil, which is very important for the long-term performance and adaptive maintenance of plant and machinery. For instance, moisture affects dramatically the insulation characteristics of electrical transformer oil and therefore continuous monitoring is extremely important.
Series FTEE measures accurately water activity (aw) and temperature (T), and calculates water content (ppm).
2. Typical Application
Monitoring of
- Transformer oil
- Lubrication oil
- Hydraulic oil
- Engine oil
- Diesel fuel
3. Product Version
The physical quantities measured are water activity aw and temperature T. With these quantities FTEE calculates the water content (ppm) in mineral transformer oils. Calculation of water content in non-mineral transformer oils and lubrication oils can be accomplished by downloading specific parameters of the oil.
4. Humidity/moisture/water content measurement in oil
Similar to the humidity in the air, the water content in an oil can be described by the absolute value in ppm or by the relative value aw:
- ppm (mass of water / mass of oil)
- aw (actual water content as fraction of the water content in the saturated oil)
aw = 0 corresponds to water-free oil, while aw = 1 describes fully saturated oil.
aw measurement with FTEE transmitter series is based on the outstanding long term stability and resistance to pollution of the FTEE capacitive sensor elements series HC.
5. Technical Parameters
|
Power Supply |
AC 220V/50Hz (optional) |
|
|
DC 9V～33V (standard configuration) |
||
|
Signal Output |
RS232 serial output |
|
|
Two 4～20mA output,the maximum loop load 500Ω(optional) |
||
|
two relay alarm output (optional) |
||
|
LCD Display |
Switch water activity(aw),temperature(℃) and water content(ppm)at will. |
|
|
Alarm Line Setting |
The alarm value can be set by serial port setting software (aw,t,ppm)(optional) |
|
|
Probe Type |
Several types to be choose according to customers' needs for the probe length. |
|
|
Probe Cable Length |
1m(Can be customized for other length) |
|
|
Working Mode |
Support on-line/off-line test |
|
|
Required Test Temperature |
Maximum Pressure |
10 bar |
|
Oil Temperature |
-40℃～125℃ |
|
|
Water Activity Collection aw |
Test Range |
0～1 aw |
|
Test Resolution |
±0.0003 aw |
|
|
Test Accuracy |
±0.02 aw @(0～0.8 aw) |
|
|
Repeatability Error |
±0.002 aw |
|
|
Response Time with Stainless Steel Filter |
10 min |
|
|
Temperature Collection T |
Test Range |
-20℃ ～ 80℃ |
|
Test Resolution |
0.015℃ |
|
|
Test Accuracy |
±0.5℃ @(0～80℃) |
|
|
Repeatability Error |
≤ ±0.2℃ |
|
|
Response Time |
30 s |
|
|
Absolute Water Content AH |
Test Range |
0 ～ 1000 ppm |
|
IP Grade |
IP Grade of Probe |
IP67 |
|
IP Grade of Shell |
IP65 |
|
6. Functions & Features
1) Measurands: water activity (aw), temperature (T) and water content (x) in ppm
2) Oil temperature up to 180°C (356 °F)
3) Enclosure Housing in polycarbonate or metal
4) Remote probe up to 20m
5) Optional pluggable sensing probe
6) Optional LCD Display
7) Optional connector for power supply and outputs
8) Optional integrated power supply
9) Pressure rating 20 bar
10) Optional ball valve
11) Easy field adjustment and output configuration by the user
7. On-site Project
8. Packing, Delivery, Shipping and Payment
9. Certificates
10. FAQ
1). What is the mini order quantity?
MOQ: generally 1 unit/piece/set
2). What payment methods are supported?
Payment method: By T/T, L/C, Western Union, Cash, etc.
3). What are the available delivery methods?
Our port location: Chongqing, Shanghai or other main port of China
Delivering to: Worldwide
Delivering method: by sea, by air, by truck, by express, combined transportation
4). How long is the product date of delivery probably?
Delivery date differs with product type, order quantity, special requirement etc. Usually this testing equipment delivery time is around 5~10 days. Some products have stock; contact us anytime to get more information.
Our company adheres to the service tenet of 'quality wins'. According to the different needs of users and through rigorous production process and quality management, we will deliver higher quality Lube Diesel Fuel Transformer Oil Online Ppm Moisture Meter to our customers. We strive to blaze a trail of innovation, development, and integrity in the alcohol industry. Our goal is to create a national brand, and at the same time to catch up with the world's scientific and technological level.
Hot Tags: online ppm moisture content meter ftee, China, suppliers, manufacturers, customized, price, in stock, buy discount, Multi function Digital Insulation Resistance Tester, lube oil purification system, petroleum products density tester, Digital Surface Tensiometer, Oil Dissolved Gas Analyzer, transformer volt ampere characteristic integrated tester
