We are constantly improving the environmental management system of the whole operation process, and we strive to minimize the impact of our oil regeneration device, oil regeneration, vacuum pumping group on the environment by controlling the production of our products at the source. Through a global marketing network, the company provides efficient and convenient products and technical services for electric power, petrochemical, manufacturing, real estate, and other industries. In the face of fierce competition in the market, our company develops steadily under the guidance of the principle of paying equal attention to quality and service.
1. Introduction & Application
FTHS Series Gas Recovery and Re-filling Machine designed and produced by FUOOTECH is widely used in SF6 gas insulated electrical equipment factory, use, operation, scientific research departments and so on, to create vacuum for a variety of electrical equipment, and fill electric equipment with SF6 gas, and recover SF6 gas from use or test equipment, then fill to storage tank after purifying and compressing.
The recovery device is suitable for SF6 electrical appliance and GIS combined electrical apparatus. The gas recovery unit of SF6 is manufactured on the basis of the standard of DL/T662-2009 "SF6 gas filling and recovery device", which consists of recovery system, and inflating system, vacuum system, purification system and gas storage system.
2. Main Function
● Vacuumize and check vacuum pressure for retrieving device itself including its storing vessel and pipes;
● Vacuumize and check vacuum pressure for the insulation equipment;
● Retrieve and store SF6 gas and check the remaining vacuum pressure of the insulation equipment;
● Get rid of water content and other particulates in the SF6gas with filtration and purification process;
● Refill up the SF6 gas into the insulating equipment to specified operating pressure.
3. Technical Parameters
|
Item |
Name |
Unit |
Model |
||||
|
FTHS-2 |
FTHS-10 |
FTHS-15 |
FTHS-30 |
FTHS-60 |
|||
|
Technical parameter of the equipmen |
Capacity |
m³/h |
2 |
10 |
15 |
30 |
60 |
|
Recovery pressure |
MPa |
≤0.05 |
|||||
|
1m³ gas recovery time (initial pressure 0.6MPa) |
h/m³ |
≤3 |
≤0.6 |
≤0.4 |
≤0.2 |
≤0.1 |
|
|
Final pressure |
MPa |
0~0.8 Adjustable |
|||||
|
1m³ gas injection time(initial pressure 133Pa to 0.6MPa) |
h/m³ |
≤3 |
≤0.6 |
≤0.4 |
≤0.2 |
≤0.1 |
|
|
The time required for 1m³ volume vacuity from 0.1MPa to 133Pa |
h |
≤1 |
≤0.6 |
≤0.4 |
≤0.4 |
≤0.4 |
|
|
Ultimate vacuum |
Pa |
≤10 |
|||||
|
Gasification way |
|
Electric Heating |
|||||
|
Liquefaction way |
|
High pressure condensation liquefaction |
|||||
|
Dry filter regeneration mode |
|
Vacuum activation regeneration |
|||||
|
External dimensions |
mm |
1000*800* |
1600*1200* |
1800*1200* |
1800*1200* |
2300*15800* |
|
|
Working power |
V |
(380V-50Hz) 3Phase 4 Wires, or as per buyer's option |
|||||
|
Total electrical power |
KW |
5 |
8 |
12 |
18 |
22 |
|
|
Performance Index |
SF6 Gas purity after recovery |
PPM |
60 |
||||
|
Oil content |
PPM |
5 |
|||||
|
Impurities |
μm |
1 |
|||||
4. Technical Performance
|
Type |
High pressure liquefaction, mobile |
|
|
Working Environmental Temperature |
-10℃~45℃ |
|
|
Recovery |
Initial pressure |
0.8 |
|
|
Final pressure (Mpa) |
≤0.03 |
|
|
Time to recover 1 m³ gas(h/ m³) |
≤0.3 |
|
Filling |
Initial pressure(PA)) |
≤133 |
|
|
Final pressure (Mpa) |
0~1(Adjustable) |
|
|
Time to fill 1 m³ gas(h/m³) |
≤0.3 |
|
Time for pumping vacuum from 0.1Mpa to 133Pa(h/m³) |
≤0.3 |
|
|
Limit vacuum (Pa) |
≤10 |
|
|
Increasing value in 24 hours for the vacuum keeping at 133PA(PA) |
≤400 |
|
|
Gas purity after recovery SF6 |
Water content(PPM/V) |
≤60 |
|
Oil content (PMM/W) |
≤10 |
|
|
Storing tank |
Dust(μm) |
≤1 |
|
Storage method |
Liquid gas |
|
|
Pressure (Mpa) |
5 |
|
|
Volume (L) |
110; 200; 300 |
|
|
Liquid volume(Kg) |
100; 180; 280 |
|
|
Liquefaction method |
|
High pressure condensing |
|
Vaporization method |
|
Heating with electricity |
|
Dry filter regeneration |
|
Vacuum heating activation regeneration |
|
Power |
|
According to your requirement |
|
Total power (KW) |
|
≤18 |
5. Features
1) Advanced design, full function and compact structure with simple operation.
2) Compressed systems: it takes closed compressor to ensure no leakage.
3) Vacuum systems: it takes rotary vane vacuum pump to prevent oil returning
4) Purification systems: Equipped with Ingersoll Rand filters which takes electric heating and high efficient adsorbents. Without frequent replacement of the adsorbents, so the purification result is better.
5) Electric systems: Equipped with automatically confirmation three phase power devices, failure protection.
6) Control systems: the valves take the latest technology.
7) Storage system: Provide the storage tank according to users requirements.
8) This equipment is made in mobile type.
6. Packing, Delivery, Shipping and Payment
7. Certificates
8. The Main Components and Functions of The Device
The main functions of the device include compressor, vacuum pump, refrigeration system, dry filter regenerator, heater, purifier, filter, pipeline, valve, instrument, electrical control and structural parts, frame panel, running wheel and storage tank.
We strive to implement the business philosophy of 'determining the needs of customers as the starting point and satisfying the needs of customers as the end point' throughout our work. All employees of our factory will help you to succeed with first-class Mobile Vacuum Pump Unit, thoughtful service and low prices! We will keep you informed of our progress and look forward to building steady business relations with you. We get trust from our customers account for our excellent product quality, better price advantage and comprehensive after-sales service.
Hot Tags: sf6 gas vacuuming recovery system and refilling unit, China, suppliers, manufacturers, customized, price, in stock, buy discount, Asphalt Viscosity Test Equipment, Hand Held Dewpoint Meter, Transformer Oil Trace Moiscture Tester, Handheld TTR tester, vacuum oil filter, Transformer Capacity Loss Tester
