We are dedicated to the research and development of new Transformer Winding Resistance Tester, transformer oil filtration systems, oil decolorizing equipment and to leading the new trend of the market. We insist on safety and environmental protection as the premise, quality and efficiency as the center, and reform and innovation as the driving force. We have always been based on satisfying the rights of consumers and establishing a worldwide sales network to better serve consumers. We always insist on providing safe and efficient technology and service, and establish a good image of responsibility and commitment in the industry. We develop together with our partners, share benefits, create market together, and wholeheartedly provide our customers with high-quality products and warm, thoughtful and satisfactory services.
1. Introduction
The FUOOTECH Independent transformer oil regeneration product line brings your transformer's insulating fluids back to life and restores them to their optimum condition.
FUOOTECH's TOR Transformer Oil Regeneration System utilizes physiochemical means to recover deteriorated transformer oil and breaker oil while removing the acid content, suspended matter and precipitated residues from the oil. It utilizes a special purification, which allows transformer to stay running in normal manner without switch off of power and change of oil.
The basic content and anti-oxygenic property of oil remains the same after treatment, and is brought back to the specification of new oil. Insulator property and safety of equipment are enhanced while cost is reduced by 90%, compared with conventional way of oil-change.
It is recommended to use the transformer oil filtration machine firstly, when the oil withstand-voltage is treated at an acceptable range by the transformer oil filtration machine, and then use this TOR Transformer Oil Regeneration Device to recover the electrical properties of the aging insulating oil, you will find that the effect will be better.
2. Through TOR Oil reconditioning system, the following results are achieved:
• The moisture content in the oil is reduced to below 10 ppm.
• The acidity value is reduced to less than 0.03 mg KOH/g oil.
• The dielectric strength (BDV) is improved to better than 60 – 70 kv
• The IFT (Interfacial tension) is improved to up to 40 Dynes.
• The Tan Delta (tgδ 90℃) of the oil is improved to equal or less than 0.005.
• Sludges dissolved or in suspension in the oil as well as sludge deposits are removed.
• Particulate removal to 1 micron is achieved
• The oxidation stability of the oil restored to equal that of new oil.
• The color of the oil is improved.
• The dielectric strength of the solid insulation is improved.
• Degradation of the solid insulation has been halted.
3. Oil Comparasion Before and After Regeneration
4. Technical Parameters
Items |
Unit |
TOR-50 |
TOR-100 |
TOR-150 |
||
Flow rate |
L/H |
3,000 |
6,000 |
≥ 9,000 |
||
Flash point (Closed cup) |
℃ |
≥135 |
||||
Dielectric strength (break-down voltage) |
kV |
≥65 |
||||
Dielectric Loss Factors |
tgQ(90℃)% |
≤0.005 |
||||
Filtration Precision |
µm |
≤5 |
||||
Acidity |
mgKOH/g |
≤0.03 |
||||
Power Supply |
380V, 50HZ, 3Ph (or as per request) |
|||||
Working Pressure |
≤0.3MPa |
|||||
Motor Power |
KW |
1.1 |
2.2 |
4 |
||
Heating Power (Optional) |
KW |
30 |
48 |
90 |
||
Weight |
KGS |
254 |
430 |
600 |
||
Dimension(L×W×H) |
mm |
1200×650×1300 |
1250×800×1350 |
1300×950×1450 |
Note: 1. The dimension and weight will be changed with changing of technical specs.
2. All the specs can be customized according to client's requirements.
5. Main Features & Characteristics
1) No oil heating (if heater is not required)
2) No oil vacuuming (if vacuum process is not required)
3) New oil not required, thus saving resources
4) Cost effective
5) Ecology friendly (zero gas emission and no disposal of waste oil)
6) Transformer washing not required
7) No exposing of transformer core to atmosphere
8) Low energy consumption
9) Simple machinery construction
10) Simple handling
11) Easy installation
12) Minimum supervision
13) Field operation in all weather conditions, mobile trailer mounted and fully enclosure parts are optional
14) Minimal power consumption
6. Flow Diagram
7. Packing, Delivery, Shipping and Payment
8. Onsite Projects
9. Certificates
10. Our Advantages
1) 19 years experience in developping and manufacturing according to related China and internatinoal standards
2) Choose Higher quality raw material from the demostic and worldwide market
3) Own complete and advanced production facilities
4) Has the strict test procedures on raw materials and products from A to Z.
5) Have passed CE, ISO certificates
6) Longer warranty period for all our products (2 Years)
7) Factory Direct Sale, More competitive price
8) Variety types for selection and OEM & ODM are available
In recent years, the application field of Top Removable Trailer Type Used Transformer Oil Processing Equipment (Series ZYM) has been continuously expanded and the demand for the development of various new series has continued to rise. You may send us emails and contact us directly. We continue to improve our strategic layout and broaden our sales network and market space to be able to provide products and services to our customers in a timely and efficient manner.
Hot Tags: bz independent oil regeneration system, China, suppliers, manufacturers, customized, price, in stock, buy discount, winding resistance tester, transformer oil treatment equipment, Oil Water Separation System, SF6 gas handling plant, Transformer DC Winding Resistance Tester, Transformer Winding Resistance Tester