ASTM D93 Flash Point Tester Engine Oil Analysis Instrument (TPO-3000)

Each of our Transformer Power Factor Tester, oil transfer unit, Transformer Oil Tester is carefully manufactured and inspected in strict accordance with quality standards to ensure the best quality is sent to our customers. We understand that today's world is changing rapidly and good corporate governance must keep pace with the times. We build a humanistic enterprise management system and form an institutional mechanism for scientific operation and standardized management.

1. Introduction & Application
The FUOOTECH's FT-FPC Automatic Closed Flash Point Tester is designed and made as per the National Standard of People's Republic of China GB/T261-2008; GB/T21615-2008; European standard ASTM-D93, it is an advanced analytical instrument, mainly used to determine the closed flash point of petroleum products.

This Automated Closed Cup Flash Point Tester is controlled by microcomputer. It is automatic electronic ignition without the need of gas source. It is reliable and easy to operate with self-test function, high measurement accuracy, good repeatability and stable performance. It is an ideal instrument for closed flash point testing in electrical power, petroleum, chemical, power, environmental protection, railway and scientific research, etc.

2. About Flash Point of Transformer Oil

Flash Point is the lowest temperature at which a liquid can form an ignitable mixture in air near the surface of the liquid. The lower the flash point, the easier it is to ignite the material. Nowadays, Flash point is used to say non-volatile or flammable substances whether exit highly volatile or flammable substances, and has been one of the most important parameters for petroleum products transportation, storage, operations, safety management…

Flash Point of Transformer Oil is defined as the temperature at which light hydrocarbon present in the transformer oil starts evaporating causing a flash on introduction of source under specified condition. It is an important parameter which must be maintained above 140 degree Celsius.

Light hydrocarbons are already present in the transformer oil and gets evaporated under the influence of heat due to electrical stress. Light hydrocarbons are also generated by the degradation of the oil due to aging / heat / electrical stress.

Flash Point of new Transformer Oil should be more than 140 degree Celsius. In any case, this temperature should not be allowed to be less than 130 degree Celsius for transformer oil in service.

3. Technical Parameters

4. Functions & Features

1). 7-inch industrial color touch screen display, no mechanical contacts, dustproof and waterproof, anti-radio frequency interference, long service life.

2). Equipped with parameter prompt function such as test date and test time.

3). Built-in Germany automatic atmospheric pressure detector: automatic to detect and correct the atmosphere pressure; self-adjust the flash point.

4). Able to store 999 testing data.

5). With imported PT100 sensor for differential detection, automatic correction of system deviation.

6). Cover opening, ignition, detection and printing data are automatically completed.

7). Large-caliber air duct and large air volume fan quickly cools down to shorten the test time.

8). Use built-in battery to ensure that test data can be stored for 5 ~ 8 years even when the external power is off.

9). Built-in high speed thermal printer, quieter, faster and clearer.

5. Stocks at office

6. Packing, Delivery, Shipping and Payment

7. Certificates

8. Accessories

1) Main Tester 1 Set

2) Sample cup 1 Pcs

3) AC power cord 1 Set

4) Printing paper 1 Roll

5) Instruction manual 1 Copy

6) Certificate 1 Set

Welcome to visit our website and visit our company, welcome your inquiry and contact.

We will closely integrate market development trends and the needs of consumers, and will be courageous in innovating and continually improving our ASTM D93 Flash Point Tester Engine Oil Analysis Instrument (TPO-3000). We adhere to the quality of products as the fundamental, professional and technical research and development personnel strictly control the quality. We always pursue the most perfect after-sales service, constantly improve the customer response mechanism, and reflect the professional and timely service tenet.