Ql-Z1500 Zero Air Generator for Gas Chromatograph

The company will carry forward the enterprise spirit of "seeking truth from facts, managing the factory strictly, struggling hard, and striving to be first-class", adhere to the modern production equipment and advanced management methods as the basis, hold high the banner of scientific development, and write a strong mark for China's transformer oil treatment equipment, steam turbine lube oil purifier, Transformer vacuum drying System! We have always been adhering to the customer first, high-quality and efficient service tenet, and the enterprising spirit of striving for perfection and pursuing excellence, constantly innovating and expanding the field. In the fierce market competition, we pay special attention to quality and are willing to provide high-quality products and services to the majority of users. We always ensure the first-class product quality. For our company, quality is more important than life. We adhere to the steady development of marketing strategy, to provide customers with a variety of excellent products and a full range of services.

1. Introduction & Application

GC-2010SD transformer oil spectrum analysis of process design of the system fully in line with the People's Republic of China electric power industry standard DL/T 703-1999< gas content in insulating oil by gas chromatography method in the chromatographic process design. 

This DGA Dissolved Gas Analyzer of Transformer oil is equipped with the provisions. The thermal conductivity detector with high sensitivity and hydrogen flame ionization detector, and a nickel catalyst converter, can be dissolved in transformer oil nine gas components: hydrogen, oxygen, nitrogen, carbon monoxide, carbon dioxide, methane, ethane, ethylene, acetylene measuring. Its performance to meet the requirements of gas insulated DL/T 703-1999< chromatograph oil and gas content in gas chromatography ".

2. Analysis of dissolved gases in insulating oil

Content determination of dissolved gases in insulating oil by gas chromatography is set, the power supply enterprise to judge the oil filled power equipment in the operation of the existence of latent heat, discharge fault, in order to ensure the effective operation of the power grid safety, it is also one of the necessary means of testing equipment for oil-filled electrical equipment manufacturers. GC-2010SD transformer oil chromatographic analysis system using three detector process standard recommend, a sampling can complete component of dissolved gas in insulation oil (including hydrogen, oxygen, methane, ethylene, ethane, acetylene, carbon monoxide and carbon dioxide) full content analysis.

3. Technical Parameters

(1) Operation display: 5.7-inch lattice localization color LCD

(2) Temperature control region: 6 Road

(3) Temperature range: Above room temperature 8℃ ~ 450℃, Incremental: 1℃, Accuracy: ±0.1℃

(4) Temperature programmed order number: 16 order

(5) Cheng Sheng rate: 0.1~39℃/min

(6) Gas Control: Mechanical valve control mode, electronic flow controller (EFC) and electronic pressure controller (EPC) method

(7) External event: 4 way; Auxiliary control output 4 road.

(8) Injector type: Packed column sample or 10 quantitative sampling valves.

(9) Number of detector: 3; double FID, TCD

(10) The parameters of the Ni conversion furnace: More than 85% or higher; Working temperature 350 ℃

(11) Boot into the sample: manual, automatic optional

(12) Communication interface: Ethernet: IEEE802.3

Flame ionization detection (GC-FID).

Detection limit: Mt≤3×10-12g/s (Sixteen alkanes)

Noise:≤5×10-14A;

Drift:≤1×10-13A/30min;

Linearity range: ≥106

Thermal conductivity detector(TCD)

Sensitivity: S≥3500mV•ml/mg(Sixteen alkanes)(1, 2, 4, 8 x magnification optional)

Noise:≤10μV;

Baseline drift:≤30μv/30min

4. Stocks at office

5. Packing, Delivery, Shipping and Payment

6. Certificates

7. FAQ

1). What's the MOQ of this Transformer Oil Dissolved Gas Chromatography Device?

A: 1 Set.

2). What's the delivery time?

A: Generally, it takes about 10 working days for production and then the delivery will be done timely.

3). What's the warranty for this tester?

A: 1 year from the date of shipment.

4). What's the delivery method?

A: By train, by air, by sea, by truck, by express, etc.

With a mission of 'Commitment to Excellence', our R & D team, with many years of experience in the field of Ql-Z1500 Zero Air Generator for Gas Chromatograph, is constantly dedicated to improving the quality, performance and range of applications according to needs of customers. Our factory is actively facing the world economy and creating a brand by quality and service. Relying on technology, strictly quality control, relying on innovation, satisfaction of customers, accompanied by hard work, more beautiful, is our employees' constant pursuit.