Sereis LOP Vacuum Lubricating Oil Purifier Equipment (also named as lube oil purifier system) is widely used for purifying the various industrial lube oils by quick dehydration, degassing and removing impurities.
The oils can be purified by this machine:
1,Unqualified hydraulic oil
2,Hydraulic transmission oil
3,Refrigerating oil
4,Mechanical oil
5,Pressure solution oil
6,Air compressor oil
7,Quenching oil
8,Gear oil
9,Heat treatment oil
10,Anti-wear hydraulic oil
11,Seriously emulsified oil
12,Excessive water oil
13,Injection molding machine oil
14,Cylinder oil
15,Textile machine oil
16,High-speed machinery oil
and other high-precision lubricating oil etc.
Technical Parameter
|
Item |
Unit |
LOP-10 |
LOP-20 |
LOP-30 |
LOP-50 |
LOP-100 |
LOP-150 |
LOP-200 |
LOP-300 |
||
|
Flow rate |
LPH |
600 |
1200 |
1800 |
3000 |
6000 |
9000 |
12000 |
18000 |
||
|
Vacuum degree |
Mpa |
-0.06 ~ - 0.095 |
|||||||||
|
Working pressure |
Mpa |
≤0.4 |
|||||||||
|
Temperature Control Range |
℃ |
0 ~ 100 |
|||||||||
|
Operation Temperature |
℃ |
50 ~ 70 |
|||||||||
|
Demulsification |
Min |
New oil≤15min, running oil≤30min |
|||||||||
|
Power supply |
380 VAC, 50 Hz, 3 Phase (or as per required) |
||||||||||
|
Working noise |
DB (A) |
≤ 65 ~ 90 |
|||||||||
|
Electric heating power |
KW |
18 |
24 |
26 |
30 |
48 |
60 |
96 |
135 |
||
|
Total electric power |
KW |
19.3 |
25.3 |
27.6 |
32.6 |
56 |
69 |
106.5 |
147 |
||
|
Inlet (outlet) caliber |
mm |
Ф25 |
Ф25 |
Ф25 |
Ф32 |
Ф42 |
Ф50 |
Ф50 |
Ф60 |
||
|
Weight |
Kg |
450 |
550 |
600 |
750 |
850 |
1000 |
1200 |
1500 |
||
|
Dimension (L × W × H) |
mm |
1500 x1000 x 1500 |
1550 x1050 x1600 |
1600 x1050 x1650 |
1600 x 1150 x1700 |
1750 x1250 x 1800 |
1900 x1600 x1950 |
1900 x1700 x2000 |
2100 x1700 x2100 |
||
|
Oil Result after Purification |
Moisture (water content) ≤100 PPM (remove 100% of free water and 99%of dissolved/emulsified water) |
||||||||||
|
Gas Content ≤0.01% |
|||||||||||
|
Suspended Particles (Filtration precision) ≤ 5 micron |
|||||||||||
|
Demulsification New oil≤15min, running oil≤30min |
|||||||||||
|
Cleanliness ≤NAS 1638-Grade 5 |
|||||||||||
Note: 1. The dimension and weight will be changed with changing of technical specs.
2. All the specs can be customized according to client's requirements.
Why Lubricating Oil Need Be Purified?
1) Air will accelerate the oxidation of the oil, make the oil foam during the heating and cooling process, reduce the rigidity of the oil system, the action response is slow, and the lubrication system components are damaged due to air pockets.
2) Moisture is a common pollutant in oil. It makes oil turbid, accelerates oxidation, generates water-soluble acid, precipitates additives, decreases viscosity, and reduces lubricating performance.
3) Common water in oil exists in 3 ways:
A. Suspended water: the water is suspended in the oil in the form of drops below.
B. Emulsified water: extremely tiny water droplets evenly dispersed in the oil.
C. Dissolved water: water exists in the form of being dissolved in oil.
Solid particles: seriously damage the system components, if allowed to circulate in the oil, it will have a chain reaction of wear.
