1.Introduction and Application
PO Series Portable High Precision Oil Transfer and Filtration Machine developed by FUOOTECH is mainly dealing with unqualified insulation oil, turbine oil, lubricating oil etc., its design is simple, compact, practical and easily to move and maintenance.
PO portable oil purifier machine consists of motor-driven special gear pump and multi-stage filters for filtering dirty oils by removing various sizes of particles & impurities. Small and flexible size, easy to operate and requires no filter paper and causes no contamination to the ground. It has a wider application than ordinary filter press and has a long lifetime, being a new substitute for frame filter press.
This portable oil filtration system also can conveniently filter the oil of venous hydraulic and lubricating systems and also can be connected to the system as a bypass filter.
2.Working Principle
Oil suction point is equipped with a coarse filter to protect pump, and prolong the service life of main two filters. Filter precision can be adjusted and changed according to client's actual need. This machine can do precision filtering, it usually equips three-stage filters, also can equip four or five stage filters as per user's requirements . Light weight, easy operation, it can be used as oiling machine for long distance and high-lift oiling works.
Pressure Gauge monitors the working status of machine and pollution levels continuously.
It is also used for oil transferring/ filling at working fields, suitable for field portable assignments and aerial work, while oil filling, filtration is also done at same time.
3.Technical Parameters
|
Item |
Unit |
PO-32 |
PO-50 |
PO-100 |
PO-150 |
PO-200 |
PO-300 |
PO-500 |
PO-600 |
||
|
Flow rate |
L/H |
1920 |
3000 |
6000 |
9000 |
12000 |
18000 |
30000 |
36000 |
||
|
Working Pressure |
MPa |
≤ 0.4 |
|||||||||
|
Pressure when replacing filter |
MPa |
＞0..2 |
|||||||||
|
Operation Temperature |
℃ |
5 ~ 80 |
|||||||||
|
Lift |
m |
5 |
8 |
8 |
10 |
15 |
15 |
18 |
20 |
||
|
Cleanness |
NAS |
7 |
6 |
6 |
6 |
6 |
5 |
5 |
5 |
||
|
After Filtration |
Impurity size: ≤ 3 ~ 5 microns |
||||||||||
|
Power supply |
380 VAC, 50 Hz, 3 Phase (or as per required) |
||||||||||
|
Working noise |
DB (A) |
≤ 65 ~ 75 |
|||||||||
|
Motor Power |
KW |
0.75 |
1.1 |
1.5 |
2.5 |
3 |
6 |
9 |
13 |
||
|
Inlet (outlet) caliber |
mm |
Ф25 |
Ф25 |
Ф25 |
Ф32 |
Ф42 |
Ф50 |
Ф50 |
Ф60 |
||
|
Weight |
Kg |
95 |
105 |
120 |
130 |
140 |
160 |
300 |
370 |
||
Note: 1. The dimension and weight will be changed with changing of technical specs.
2. All the specs can be customized according to client's requirements.
