When the oil filter is working, the contaminated oil enters the heater through the inlet under the action of the external atmospheric pressure vacuum suction, the heated oil enters the primary filter, the large particles of impurities are filtered out, and then the oil enters the vacuum separator and flows Through a special divergence device, the divergence device produces a huge surface area per unit volume of oil, exposing the polluted oil to an atmosphere with very low relative humidity, thereby removing water, air and gas in the oil, evaporating water vapor, The mixed gas formed by the gas is condensed into liquid through the water tank and the cooler, and enters the water reservoir together, and the remaining gas is vacuumed out. The water-removed oil is fed into the fine filter by the drain pump to remove particulate impurities, that is, the purified oil. After completing a purification process, depending on the water content, multiple cycles are required to completely remove the water.
Jul 14, 2021
The Working Principle Of Oil Filter
Previous
Send Inquiry
Product Categories
Latest Products







